We provide our customers with only the best regulators and regulator accessories in the industry. Each of our manufacturers has a limited or lifetime warranty that guarantees the quality of the equipment you are purchasing for the time that you own it. You cannot get a better deal than having a product that is fully supported by Signature Scuba and the manufacturer. We have many items to choose from as well; check our our inventory today!
MORE CHOICES AVAILABLE
Part# AC2199
A regulator necklace is an essential tool for advanced and technical divers. A necklace allows the diver to stow their backup or secondary regulator just under their chin for quick access if needed. Divers utilizing a regulator necklace typically subscribe to the ‘donate the primary regulator’ philosophy in an out-of-air scenario, with the primary regulator on a longer hose.
The Dive Rite Regulator necklace allows for easy size adjustment for a perfect fit. Simply tie an overhand knot at the desired length and trim the excess bungee. The knot recesses into the locking cone for a clean look. The necklace quickly installs onto the second stage by pulling both sides of the bungee to tighten the loop around the mouthpiece.
Personalize your gear with a splash of color. The Dive Rite Regulator Necklace is available in Red, Yellow, Blue, Pink, and Tech Diver Black.
Part# RG5400
Simple, lightweight regulator for oxygen and deco mix use.
The Dive Rite Oxygen Decompression Regulator is a compact, lightweight option for a deco regulator. Assembled in a clean room using all oxygen-compatible materials and lubricants, this shallow water deco regulator can be used with higher concentrations of oxygen without the need for additional set-up.
An unbalanced piston DIN first stage provides the ideal performance for a shallow water regulator. An OPV on the first stage provides an additional margin of safety in the event of a first stage failure. A single HP port is used for a 1-inch button gauge.
The XT2 second stage is a pneumatically-balanced second stage with Venturi assist to provide a consistent gas pressure delivery for smooth inhalation. User adjustability on the second stage allows divers to tune the inhalation setting to match their personal preference. An orthodontic mouthpiece reduces jaw fatigue on longer deco obligations. A 40-inch, green low pressure hose and green faceplate on the second stage come standard to indicate oxygen use.
Note: The Oxygen Deco Regulator is ONLY intended for use as a deco regulator. Do not attempt to use for a stage bottle/travel regulator.
Note: The Oxygen Deco Regulator is not intended for use deeper than 50-feet (15 m) on appropriate gas mix.
First Stage
Second Stage
Total Weight: 1.64 lbs (0.75 kg)
Part# SRB9750
The new Sherwood Oasis Pro is a completely new design and ready to provide you comfort and easy breathing in all diving conditions. The Oasis's new 2nd stage proprietary valve design has been tested in the most rigorous conditions and continues to perform extraordinarily well. Both in the laboratory and in conducted testing the Sherwood Oasis has stood up to every test. The proprietary Moisture Retention Vane does an outstanding job capturing exhaled moisture and returns it upon inhalation. No more cotton mouth with this regulator! The larger diaphragm and purge cover and responsive to inhalation provide easy breathing throughout the dive. And the diver operated Venturi control allow the diver to adjust the setting. The Oasis 1st stage is a completely dry and environmentally sealed 1st stage maintains a clean interior. No gels or liquids to seal the Piston 1st stage design.
Part# GR910
Steeped in tradition of the GS2000, the Prana Regulator delivers on the expectations around the world for breathing performance, durability, longevity, and styling. This top performing regulator is designed to perform in a wide variety of extreme conditions. The dry environmentally sealed flow by piston 1st stage with the patented Dry Air Demand (DAD) will perform consistently regardless of depth or tank pressure. The fine tune breathing resistance 2nd stage, combined with an extremely reliable 1st stage, will deliver a smooth breathing experience regardless of diver’s breathing demand. This regulator is suitable for water temperature warmer than 10°C (50°F).
DETAILS
First Stage
•Spring chamber is environmentally sealed to maintain cleanliness reducing the effects of corrosion and contamination. This contributes to uniform high performance as the regulator is used.
• Balanced flow by piston delivers ample air volume at stable intermediate pressure to the second stage over a wide range of supply pressures
• First stage uses no liquids or gels that can leak or add to service costs
• Tee-shaped design reduces regulator profile when mounted on tank
• Four LP ports and two HP ports for more options and ideal hose positioning
• Nitrox compatible up to 40%
• DAD Dry Air Demand - Internal pneumatic depth compensation mechanism
Second Stage
• Diver adjustable Breathing Effort Control Knob
• Injection molded thermoplastic rubber seat is harder than silicone seats and maintains its shape and does not coin as deeply
• Diver operated Venturi Switch
• Free Parts for Life (Restrictions Apply)
Part# 11.332.200
Part# SRB2000CE
The SR2 regulator continues the legacy the SR1 created. It packs advanced technology into a compact case, employing contemporary styling and utilizing a multitude of cutting-edge materials.
The SR2 is the ONLY Flow Through Piston Regulator that is both environmentally sealed and internally dry, and still offers a depth compensation mechanism. This is no easy task to achieve. Sherwood’s Three Pin Link (3PL) transfers the environmental pressure to the piston and provides consistent flow at any depth.
Part# AC370
Convert a DIN connection to a yoke connection
Fits all 200 to 300 bar DIN valves
All brass construction
MORE CHOICES AVAILABLE
Part# 14-0101-3P
When you took dive lessons you learned to perform specific skills to make you safe and comfortable underwater and at the surface. One of those skills was buoyancy control. Once you start diving for fun you use your buoyancy control device constantly throughout the dive. Your octopus or alternate air source device on the other hand is never used unless there is an emergency out of air situation. Reacting properly in an out of air emergency can make the difference between a safe dive and a tragedy. If your alternate air source and your BCD inflator device are one and the same, you will always know where to find it in an emergency.
The SS1 is the newest and most sophisticated product of its type, taking the concept to new levels of convenience, reliability and performance. It contains a high-flow second stage that performs on the same level as many high-performance regulators. It will deliver high flow rates to a diver at depth with a minimum of effort. It is, however very stable and not prone to unnecessary free-flow or leakage from water movement while swimming, or during entries or exits. The inflator/deflator is easy to operate with soft surfaced buttons placed where they can be easily operated with one hand.
One of the most unique features of the SS1 is its adaptability to almost any BCD. Atomic has designed a set of adapters (patent pending) to fit virtually every poplar BCD brand available. The adapters also include components for attaching the cable exhaust feature of your existing BCD (if applicable). The SS1 features a quick disconnect not only on the low-pressure hose, but the BCD hose as well. The adapters that fit the SS1 to the BCD are connected to the SS1 with a threaded collar that can be easily unscrewed to detach it completely from the BCD. Now you can carry or store the SS1 with your primary regulator and gauges (patent pending).
The SS1 combines the functions of the inflator and octopus regulator into a single unit. This reduces the overall bulk and weight of your dive gear; eliminates hoses, and places your back-up regulator in a fixed, familiar location. This time proven concept is a convenient and efficient alternative to the dedicated octopus second stage. Reduce your rig by one hose with the high performance Atomic SS1. The high-flow, low-pressure disconnect is interchangeable with many other models yet smaller size and lighter in weight. Large oversized and ergonomically shaped buttons are easy to find for pneumatic or oral inflation/deflation. They are easy to distinguish and faced with soft tactile rubber surfaces.
The elliptically shaped body of the SS1 lies flat against the BCD keeping it out-of-the-way and reducing drag. Seat wear is the first cause of regulator leaks and performance degradation. The stainless-steel dynamic orifice is pressure energized and only contacts the rubber seat when in use. Equipped with a titanium lever this high-strength metal part is the link to your air supply and will never fail due to rust or corrosion. The integrated purge cover is a one-piece flexible cover allows purge of the regulator when depressed anywhere on the cover surface.
The SS1 has 316-grade stainless-steel inflation/deflation stem, quick disconnect, demand valve body, orifice and springs. The mouthpiece and diaphragm are silicone rubber and the SS1 body is manufactured from fiberglass reinforced nylon. The SS1 is a dependable downstream demand valve design. The SS1 weighs 7 oz. (200 g) without the hose and the 3/8" threaded hose also weighs 7 oz. (200 g) and measures 28" (71cm) in length. The SS1 comes with an owner's manual.
This product has a limited lifetime warranty.
http://www.atomicaquatics.com/warranty.html
714-375-1433
MORE CHOICES AVAILABLE
Part# PK5300-OW-DIN
The XT Advanced Open Water Regulator Package draws from our technical roots for a regulator setup that any diver can appreciate.
The XT Advanced Open Water Regulator Package consists of our XT1 High Performance First Stage, a matched set of XT2 Balanced Second Stages, and a Mini Tech 2-inch SPG. Along with all of the main components, accessories such as clips and necklaces are included.
With its’ optimal hose routing, there are no dangling hoses to get snagged on the dive. The primary second stage is routed under the divers arm on a 40-inch flex hose with an angled adapter. This routing keeps the hose from flaring out and the longer hose allows for comfortable air sharing in an emergency situation. The backup second stage is on a 22-inch flex hose with a necklace to be quickly accessed if necessary. The high quality Mini Tech 2-inch Brass SPG is on a 30-inch flex hose with boot and stainless clip is made to be attached on the waist or chest D-ring for easy viewing.
For transporting your XT Advanced Open Water Regulator Package to and from the dive site, a carrying bag is included.
Available in Yoke or DIN
MORE CHOICES AVAILABLE
Part# RG5300-DIN
The high performance, work horse combination of the XT1 First and XT2 Second Stage.
The XT Regulator welcomes a new generation of regulator performance at Dive Rite. An elite performer, the XT’s advanced, patented design earns top marks from Mike Ward of Dive Lab. With work of breathing at less than 1 J/l, the XT performs right alongside the premier regulators on the market today.
XT1 First Stage Regulator
XT2 Second Stage Regulator
Using oxygen compatible materials and assembly processes that are within current industry standards, the XT is suitable for oxygen enriched gas mixtures.*
*The XT2 is suitable for oxygen use only if precautions are taken. Diver must use oxygen compatible materials, keep the regulator clean from contaminants during assembly and use, and open the tank valve slowly.
MORE CHOICES AVAILABLE
Part# RG5100-DIN
Balanced, swivel turret design first stage.
The XT Regulator welcomes a new generation of regulator performance at Dive Rite. An elite performer, the XT’s advanced, patented design earns top marks from Mike Ward of Dive Lab. With work of breathing at less than 1 J/l, the XT performs right alongside the premier regulators on the market today.
Uses industry standard oxygen compatible materials and assembly processes and is suitable for enriched oxygen gas mixtures*
*The XT1 is suitable for oxygen use only if precautions are taken. Diver must use oxygen compatible materials, keep the regulator clean from contaminants during assembly and use, and open the tank valve slowly.
MORE CHOICES AVAILABLE
Part# RG5250-LEFT
High performance, pneumatically balanced second stage.
The XT Regulator welcomes a new generation of regulator performance at Dive Rite. An elite performer, the XT’s advanced, patented design earns top marks from Mike Ward of Dive Lab. With work of breathing at less than 1 J/l, the XT performs right alongside the premier regulators on the market today.
XT2 Second Stage Regulator
Note: Faceplate/Purge Cover updated December 2020.
Using oxygen compatible materials and assembly processes that are within current industry standards, the XT is suitable for oxygen enriched gas mixtures.*
*The XT2 is suitable for oxygen use only if precautions are taken. Diver must use oxygen compatible materials, keep the regulator clean from contaminants during assembly and use, and open the tank valve slowly.
Part# PK5300-SM-RL
A complete sidemount regulator solution.
The XT2’s ambidextrous orientation was made for sidemount.
The XT2 left hand regulator provides the perfect hose routing for the left tank paired with our 60-inch Airflex hose and a right angle adapter. The hose no longer has to wrap around the neck where it can catch; instead the hose runs under the arm straight to the mouth using the angle adapter. The XT2 right hand regulator pairs with a 22-inch hose for the right hand bottle, again with an angle adapter to avoid pulling.
Our braided Airflex hoses makes hose management easy and come standard with the XT2 Sidemount Regulator Package set-up. 6-inch SPGs can be mounted up or down for viewing ease, depending on diver preference.
MORE CHOICES AVAILABLE
Part# 03-0050-4P
Atomic Aquatics most compact and economical regulator system, the Z2 may be the least expensive of the Atomic line, but its combination of performance, ergonomics and materials are unmatched by the most expensive competitors. Built upon the B1/T1 platform, it shares the same breathing performance and patented features. The Z2 is a balanced flow-thru piston design using Atomics Jet Seat high-flow stainless-steel piston. Exclusive high-pressure piston seal system is self-lubricating for low friction and low maintenance. The Atomic Jet Seat System has no sharp edges that can damage the seat over time, like most competitors' first stages. Instead, Atomic employs a conical seat and blunt-end piston. Atomics' valve seats are precision machined from an extremely strong aerospace specification seat material. This design combination is the most reliable seat system in the industry and enables the seat to go 2-years or 300 dives without service. Diving performance is superior at even low tank pressure.
The regulator is Nitrox ready for mixtures up to 40% out-of-the-box. The first-stage has 2 high-pressure (HP) 7/16" and 5/7 low-pressure (LP) 3/8" ports.
The Z Series second stage is a balanced linear flow design for extremely easy breathing at all depths and dive conditions. The Z Series second-stage is built-to-last with a zirconium plated brass demand valve body, titanium lever and sealing orifice. The diaphragm is made from high-quality silicone rubber. This pneumatically balanced poppet second-stage has Atomics patented seat saving dynamic orifice which unlike most second stage orifices is a floating valve design which reduces wear on the second stage poppet seat when the regulator is not pressurized adding life to this important seal.
The Z Series second stage regulator is equipped with Atomics patented Automatic Flow Control (AFC). This unique diaphragm activated vain automatically controls the flow and Venturi effect of the second stage for optimum breathing resistance at all depths. The second stage does have a rapid adjustment knob for rare special situations. The regulator comes equipped with a 3/8" threaded 32" (81.3cm) low-pressure hose. The regulator weighs 2.3 lbs. (1,070 g) and comes with an owner's manual.
This product has a limited lifetime warranty.
Part# 320-3310
Zeagle Regulator Envoy II Octopus
Part# 350-8320
Zeagle Regulator F8 - 1st & 2nd Stage Din
