The FT1 First Stage’s fixed turret design and flat LP and HP ports allow hoses to run straight out from the side of the regulator for more streamlined hose routing. The primary second stage is routed under the divers arm on a 40-inch flex hose with an angled adapter. This routing keeps the hose from flaring out and the longer hose allows for comfortable air sharing in an emergency situation. The backup second stage is on a 22-inch flex hose with a necklace that can be quickly accessed if necessary. The high quality Mini Tech 2-inch Brass SPG is on a 30-inch flex hose with boot and stainless clip is meant to be attached on the waist or chest D-ring for easy viewing.

For transporting your FT Advanced Open Water Regulator Package to and from the dive site, a carrying bag is included.

Available in Yoke or DIN.

• Balanced first stage design maintains consistent IP and gas delivery regardless of depth or tank pressure
• 4 low pressure ports and 2 high pressure ports
• All ports are angled 90-degrees from the DIN/Yoke fitting for ideal hose routing
• Environmentally sealed to protect against internal corrosion, contaminants, and freezing
• Available in DIN or Yoke

Uses industry standard oxygen compatible materials and assembly processes and is suitable for enriched oxygen gas mixtures*

*The FT1 is suitable for oxygen use only if precautions are taken. Diver must use oxygen compatible materials, keep the regulator clean from contaminants during assembly and use, and open the tank valve slowly.

An unbalanced piston DIN first stage provides the ideal performance for a shallow water regulator. An OPV on the first stage provides an additional margin of safety in the event of a first stage failure. A single HP port is used for a 1-inch button gauge.

The XT2 second stage is a pneumatically-balanced second stage with Venturi assist to provide a consistent gas pressure delivery for smooth inhalation. User adjustability on the second stage allows divers to tune the inhalation setting to match their personal preference. An orthodontic mouthpiece reduces jaw fatigue on longer deco obligations. A 40-inch, green low pressure hose and green faceplate on the second stage come standard to indicate oxygen use.

Note: The Oxygen Deco Regulator is ONLY intended for use as a deco regulator. Do not attempt to use for a stage bottle/travel regulator.

Note: The Oxygen Deco Regulator is not intended for use deeper than 50-feet (15 m) on appropriate gas mix.

With its’ optimal hose routing, there are no dangling hoses to get snagged on the dive. The primary second stage is routed under the divers arm on a 40-inch flex hose with an angled adapter. This routing keeps the hose from flaring out and the longer hose allows for comfortable air sharing in an emergency situation. The backup second stage is on a 22-inch flex hose with a necklace to be quickly accessed if necessary. The high quality Mini Tech 2-inch Brass SPG is on a 30-inch flex hose with boot and stainless clip is made to be attached on the waist or chest D-ring for easy viewing.

For transporting your XT Advanced Open Water Regulator Package to and from the dive site, a carrying bag is included.

Available in Yoke or DIN

• XT1 First Stage
• XT2 Second Stage, Carbon Fiber cover
• XT2 Second Stage, Yellow cover
• 40 in LP hose
• 22 in LP hose
• Right angle regulator adapter
• Regulator necklace
• 2 in SPG with 32 in hose
• Small swivel bolt snap
• Hose clip retainer
• Regulator Bag

XT1 First Stage Regulator

• Balanced first stage provides consistent gas flow regardless of depth and tank pressure
• Five low pressure ports and a swivel turret results in optimal hose routing
• HP ports are angled 90-degrees from the DIN/Yoke fitting, providing the perfect angle for hose routing
• Environmentally sealed to protect against internal corrosion, contaminants, and freeze
• Available as DIN or Yoke

XT2 Second Stage Regulator

• Pneumatically-balanced design allows for consistent gas pressure for easy inhalation
• Venturi assist directs airflow from the valve directly to the mouthpiece, producing smooth inhalation
• Easy grip dive/pre-dive switch avoids free flow at surface and works well even with gloves
• Adjustable design helps diver fine tune cracking pressure so breathing resistance matches diver personal preference
• Deflection ring works to maximize performance while deterring free flow
• Orthodontic mouthpiece reduces jaw fatigue on long dives

Using oxygen compatible materials and assembly processes that are within current industry standards, the XT is suitable for oxygen enriched gas mixtures.*

*The XT2 is suitable for oxygen use only if precautions are taken. Diver must use oxygen compatible materials, keep the regulator clean from contaminants during assembly and use, and open the tank valve slowly.

The XT2 left hand regulator provides the perfect hose routing for the left tank paired with our 60-inch Airflex hose and a right angle adapter. The hose no longer has to wrap around the neck where it can catch; instead the hose runs under the arm straight to the mouth using the angle adapter. The XT2 right hand regulator pairs with a 22-inch hose for the right hand bottle, again with an angle adapter to avoid pulling.

Our braided Airflex hoses makes hose management easy and come standard with the XT2 Sidemount Regulator Package set-up. 6-inch SPGs can be mounted up or down for viewing ease, depending on diver preference.