Part# 4412

Enjoy true Olympus or Panasonic LUMIX TTL strobe exposure via fiber optic connection with your compatible Ikelite DS strobe. With the RC1 TTL Receiver and a compatible camera with RC flash mode, actual exposure data is calibrated and communicated directly by the camera. This is far more accurate and consistent than "slave TTL" modes built into some underwater strobes which watch the camera's built-in flash and react.

An individual RC1 TTL Receiver and compatible fiber optic cord is needed for each strobe. Use of two strobes requires two receivers. This product attaches to an Ikelite DS strobe. It is not intended to be attached to a housing and will provide no functionality if attached to a housing bulkhead. This receiver is not compatible with non-Ikelite strobes or non-digital Ikelite strobes. 

RC Mode TTL Strobe Exposure

The Sensor makes DS Strobes compatible with the Olympus and Panasonic LUMIX RC flash mode, providing automatic TTL exposure. For accurate performance set the DS strobe to “TTL” and the camera’s flash mode to “RC”. Using the camera’s flash exposure compensation controls to make fine tuned adjustments to the strobe’s intensity.

Manual Strobe Exposure

The strobe's output may be adjusted using the manual power settings built into the strobe (varies by model). Make sure the camera’s flash mode is set to manual. Choose the minimum flash output necessary in the camera to trigger the DS strobe. This will conserve the camera’s battery power.

Camera and Housing Compatibility 

Ikelite Housing Models:

Olympus OM-D E-M10 Mark III in Ikelite Housing # 6950.13
Olympus Stylus 1s in Ikelite Housing # 6139.51
Olympus Tough TG-3, TG-4 in Ikelite Housing # 6233.03 / 6233.04 / 6233.05
Olympus Tough TG-5, TG-6 in Ikelite Housing # 6233.06 / 6233.07
OM Systems OM-1 in Ikelite Housing # 69540

Non-Ikelite Housing Models:

Olympus OM-D E-M1 Mark II with FL-LM3 flash in Olympus or Nauticam Housing
Olympus OM-D E-M5 Mark II with FL-LM3 flash in Olympus, Nauticam, or Isotta Housing
Olympus OM-D E-M10 in Nauticam Housing
Olympus OM-D E-M10 Mark II in Nauticam Housing
Olympus OM-D E-M10 Mark III in Nauticam Housing
Olympus OM-D E-M10 Mark IV in Nauticam Housing
Olympus Tough TG-3, TG-4 in Olympus, Nauticam, or Recsea Housing
Olympus Tough TG-5, TG-6 in Olympus PT-059, Nauticam, Isotta, or Recsea Housing
Panasonic LUMIX GH3, GH4 with DMW-FL70 flash in any housing that supports use of the DMW-FL70 flash
Panasonic LUMIX GH5, GH5s with DMW-FL70 flash in Nauticam or any housing that supports use of the DMW-FL70 flash
Panasonic LUMIX GX8 with DMW-FL70 flash in Nauticam Housing
Panasonic LUMIX LX100 II with VEK0V37Z1-A flash **RC1 Receivers built on or after November 9, 2018 and designated by a 1.1 on the receiver body

Strobe and Cord Compatibility

Fiber Optic Cord Compatibility:

Ikelite Fiber Optic Coiled Cord # 4501
INON Optical D Cable "Non-wireless type" L-Connector
SEA&SEA Fiber Optic Cable (L-type) # 50107
SEA&SEA Fiber Optic Cable II # 50128
Olympus UW Fiber Optic Cable PTCB-E02
Nauticam Optical Fiber Cable # 26211 Nauticam to INON
Nauticam Optical Fiber Cable # 26212 Nauticam to Sea&Sea

Consult with your housing manufacturer for information on what type of fitting is provided at the housing end. The fiber optic ports on Ikelite housings are made to the same standard as SEA&SEA and Olympus brands.


Strobe Compatibility:

Ikelite DS50 above serial # 70000
Ikelite D51
Ikelite DS125 above serial # 5000
Ikelite DS160, DS161
Ikelite DS200 above serial # 7163

This product is not compatible with non-digital Ikelite strobes, SEA&SEA, INON, or other non-Ikelite strobes.

Part# 60466-1

ReActivate Touch Digital Manual (includes Processing fee)

Part# AC396

Easy to adjust from 150 to 250 psi

Factory preset at 200 psi (+/- 10 psi)

All stainless steel construction with Viton O-rings

Machined Delrin cap protects the adjustment point

Compact relief valve releases pressure in the event of an over pressurization of the first stage

Fits standard 3/8”-24 UNF MP regulator port

Part# 4080.09

Span your dual tray and arm system with this cable top handle. A stainless steel cable with comfortable rubber overlay is the perfect lightweight addition to carry your system to and from the dive site or pool. Works with dual trays for Compact Digital or DSLR housings with two lighting arms attached.

The cable grip can attach either around a ball mount stem or in the center slots of newer ball arm sections.

Unique Sliding Grip

If you're using our slotted arm system the carabiners can be attached in the slots of the two arms closest to the handles, allowing the cable move up and down freely. During transport, slide the cable up the slots so the arms can fold over. Having the strobes and housing hang lower provides a very natural weight distribution similar to a duffle bag. This is ideal when moving the system around, especially when handing it in and out of the water.

After you've comfortably gotten in the water, simply slide the cable down and "spread the wings" of your system. When the dive is over fold the system up during your safety stop and getting back on the boat will be a breeze. The person you hand your system up to will appreciate having an accessible handle, especially if the water is rough.

Part# SL354

The SeaLife RM-4K features brilliant 14mp still images and vivid 4K video in a incredibly small package that’s easy to hold and use alone or with attached lights like the SeaLife Sea Dragon.  

The ultra-compact removable inner camera and a robust external housing that mounts easily to a light tray.  The easy, 4-button control system makes catching the action an effortless process. 

 The ReefMaster offers WiFi sharing ability, so you can wirelessly preview, download and share pictures & videos to a smart phone or tablet with the free ReefMaster  app from Google Play Store or Apple App Store.

The easy to hold ergonomic housing was especially designed for use underwater, while the housing is easy to hold and use even with one hand, the tough enclosure also features a unique closing system – a “Pressure Lock” thumb screw that exerts the optimal amount of pressure on the housings O-ring seal.    The waterproof housing encases the small inner camera, and also stores a powerful drying agent called “Moisture Muncher” next to the camera that prevents internal fogging caused by heat and humidity trapped inside the housing.

With the expandable memory of the ReefMaster RM-4K, you can use Micro SDHC memory cards up to 128GB, ensuring you have room to shoot & save all of your video content.  It also has a time lapse function – shooting at set time intervals and saves as video file or series of still images. For optimal results, especially when shooting 4K video, use Micro SDXC Class UHS Class 3 (U3) or Video Class 30 (V30) memory cards.

Lighting is easy, use the ReefMaster RM-4K with Sea Dragon constant underwater LED photo/video lights (or other LED light sources). There’s no flash or cable to sync to an external strobe. Simply turn your light on and adjust the intensity based on the subject, conditions and distance.

The new Sea Dragon 2000F UW photo-video light delivers 2000 true lumens and a smooth, even 120° wide beam angle. This revolutionary COB LED technology produces an 80 CRI (color rendering index) that mimics natural daylight. Includes Battery and charger with international plug adapters, Flex-Connect Micro tray and grip.  Also try the optional 10x close-up or super macro lenses.  The sharp 2.0” TFT color LCD display is easy to see in all light conditions and will help keep the lens on your subject.

Features

14 megapixel Panasonic® CMOS image sensor for sharp colorful pictures

4K Ultra HD Video @ 30fps and 1080p HD video @ 60 fps

40m/130ft compact underwater housing with removable inner camera

140° Fisheye Lens – Get close to your subject and still fit everything into the picture

Underwater color-correction modes – Underwater Deep for diving and Underwater Shallow for snorkeling

Easy 4 button controls for easy operation

Wi-Fi – wirelessly preview, download and share pictures/videos to smart phone or tablet with “SeaLife ReefMaster” app (free download from Google Play Store or Apple App Store)

Image Stabilization – Electronic stabilization reduces vibration and hand movement for smoother video recording

Expandable memory using micro SDHC/SDXC memory card up to 128GB

Waterproof to 130ft / 40m

Compact design for easy handling and lightweight travel

Focus from 12” (30cm) to infinity (10X Close-up Lens or Super Macro Lens optional accessory)

Time lapse shooting at set time intervals – saves as video file or series of still images

Removable Li-ion rechargeable battery – 900 mAh / 3.8V / 3.42Wh for 2+ hours video or 500+ images

2.0” 230K Hi-res TFT color LCD

Expandable with popular SeaLife accessories (One or two Sea Dragon Photo-Video-Dive Lights, Close-up Lens, Super Macro Lens)

Part# LP22

Part# 34120

Properly clean and condition all types of buoyancy compensator devices (B.C.D.) inside out with Revivex B.C.D. Cleaner. Formerly known as BC Life, this 10 fl oz formula is also a conditioner – making it a complete maintenance system for effectively removing salt and chlorine crystals from the inside out. With each under water trip, expensive equipment is exposed to salt, chlorine and organic compounds that can damage it. Keep your dive equipment clean and make it last longer with Revivex B.C.D. Cleaner.

• Gentle Cleaner – Removes salt and bacteria from inside the bladder to outside of the B.C.D.
• Powerful – Washes away harmful residue, salt and chlorine deposits that can collect on dive gear
• Conditions – Silicone conditioners for all B.C.D. plastic and rubber parts, including valves and shells
• Concentrated – One pouch of this complete B.C.D cleaning and maintenance system is good for 10 washes
• Reduces Wear – Regular cleaning and proper maintenance with this conditioner extends the life of a B.C.D.

Part# 36135

Body odor and pet smells can ruin expensive gear. When washing just isn’t enough, use Revivex Odor Eliminator. Previously known as Mirazyme, this powerful and natural formula utilizes water-activated microbes to help remove pesky smells. Rather than hide or mask bad odors, it gently removes the stink on gear and footwear. Apply as an odor eliminator spray or use it to soak neoprene suits. Add it to a machine wash as another option to easily refresh base layers and activewear. This gentle formula can be used on most fabrics including fleece and cotton. From wetsuits to tents and boots, eliminate bad odors once and for all with Revivex Odor Eliminator. 

• Powerful – Effectively washes away odor causing bacteria from mildew, mold, pets and perspiration
• Gentle – Formula features water-activated microbes to help remove odor without damaging gear
• Concentrated – Mix half an ounce with 20 gallons of water and treat multiple garments at once; available in three sizes: 2 fl oz, 10 fl oz and 1 gallon
• HE Compatible – Designed for all types of washing machines; use as a spray or soak to treat hard to wash items like wetsuits and tents
• Multipurpose – Use on outerwear, athletic clothes, cycling gear, boots, sandals, rugs and pet items

Part# 22795

Revivex UV Protectant shields outdoor gear from harmful UV rays. Sunlight can really damage a tent or kayak. Whether it’s made of nylon fabric, plastic, rubber, or fiberglass the sun’s UV rays can break it down fast. Previously known as UV Tech, apply it to anything used outside to prevent cracks and colors from fading. This specialized formula restores gear to its original appearance by replacing lost plasticizers, rejuvenating surfaces and brightening colors. When a sunscreen for gear is needed, apply Revivex UV Protectant before or after sun exposure to keep it looking good.

• Protects – Fights sun damage and stops cracking of all types of gear including tents, kayaks, and life jackets
• Conditions – Restores the color of plastic, vinyl, neoprene, rubber, nylon, and latex to keep it bright and like-new
• Powerful – One 4 fl oz bottle prevents can repair fading fabrics, deteriorating rubber and discoloring fiberglass
• Reduces Wear – Bring old gear back to life and add years to its overall appearance with an effective UV protectant
• Multipurpose – Spray on all gear exposed to sunlight including drysuit gaskets, dive fins float tubes and waders

Part# 30140

The gentle detergent in Revivex Wetsuit Shampoo removes stains and smells from your wetsuit and neoprene without harming the fabric or stitching. Conditioning agents help prevent premature aging and oxidation. Eliminates wetsuit odor, keeps colors bright, eases entry and is biodegradable. Use 1oz per 2 gallons of water.

McNett Wetsuit Shampoo Features:

• 10oz size
• Hand wash
• Eliminates wetsuit odor
• Prevents aging and oxidation
• Keep neoprene supple and colors bright
• Made in the USA

Part# 843-6

Designed to perform even after impact on rocks and reefs, the Rotating Rock Point is a durable workhorse that is perfect for small to medium fish.  2 5/8? wing span and free rotating point design help maximize fish retention.

Part# WB100

Made of durable, UV resistant, industrial grade rubber, these weight belts are comfortable and streamlined.  Features quick release design for emergency removal. Heavy-duty 300 series stainless buckle is easy to use and lasts a lifetime. Rubber belt strap available separately. One size fits all.

Part# 23.614.000

• Made of heavy-duty 1000D Cordura, a large protective overflap secures contents with an easy-open buckle that can be opened and closed with one hand.
• A stainless steel bolt snap mounted on top clips onto a waist harness D-ring, while the adjustable strap on the back secures the pocket to your thigh.
• An internal bungee loop is provided for securing items
• Pocket’s proportions are generous, providing space for equipment like dive lights, marker buoys, spare masks or compact cameras.

Part# 22.241.001

Part# 23.607.000

• Made of lightweight marine-grade aluminum.
• Single cinch band makes for easier tank attachment.
• Design offers more vertical adjustability for fine-tuning tank positioning.
• Rubber grip pad helps keep tank securely in place.
• Fixed bolts allow for easy attachment and removal.
• Includes tank height adjustment strap with quick-release buckle.

Part# 23.609.000

• Enables you to distribute your ballast weight for optimum balance and in-water stability.
• Designed for use with the S-Tek Single Tank Adapter.
• Fit up to two kits (four trim pockets) per back plate.
• Each pocket can accommodate 2.2lbs/1kg of ballast weight.
• Trim pockets can also be attached to 2”/50mm waist webbing.
• Kit includes mounting baton, all mounting hardware and two trim pockets.

Part# 23.601.000

• Easily mounts onto the harness waist strap.
• Includes two Monprene® weight holsters in black and two ditchable weight pockets.
• Weight pockets each hold up to 11lbs/5kg of ballast weight.
• Compatible with HYDROS Color Kits, Knife Mount, Mini-D-Rings and Ninja Pocket.

Part# RE4120

The Classic Safety/Cavern Reel  is one of the most versatile length reels in our line. With its 140-feet of line, it is the perfect reel for cavern divers and their limited penetration. As a cavern diver progresses into cave training the Classic Safety Reel can act as a jump or safety reel. Wreck divers have also adopted the Classic Safety reel as the perfect reel for shooting lift bags or marker buoys.

The Classic Safety Reel is available with 140 feet of braided #24 line in either white(RE4100) or orange(RE4120). It is also available with 90 feet of heavier braided #36 white line (RE4110).

The traditional design of the Classic Safety Reel is easy to use. A top mounted handle allows divers to easily hold the reel and a light in one hand while winding the reel with the other. An ergonomic T-top stainless lockdown screw positively locks the free spinning spool in place when needed, and a retaining screw ensures that the lockdown screw cannot back out all the way and be lost.

A medium sized bolt snap is used to secure the Classic Safety Reel to a D-ring on the diver. 

• White, DuPont fiber braid line provides strength and minimizes fraying.
• Orange, Dacron line does not stretch, keeping firm tension.
• Cave series reels use #24 braid line giving 220-lbs of breakage strength. Wreck series reels use #36 braid line giving 350-lbs of breakage strength.
• Injection molded polycarbonate spools resist breakage and cracking.
• Marine grade stainless steel frame and axle are corrosion resistant.
• Marine grade stainless steel bolt snap is corrosion resistant.
• T-top lockdown screw for easy grip
• 1.08 lb (0.49 kg)

Part# OM40410

Each kit contains an SMB, Dive Reel Spool and Double-Ender Clip. The bright red and yellow Safety Pocket makes it easy to locate by the dive buddy. The Safety Pocket attaches to any 2 inch webbing or it can be clipped to the front of a BC. A zipper allows for easy access but prevents the items from falling out.  There are 3 different configurations of the Safety Kit which will meet the needs for most divers.

SAFETY KIT II

Make sure the boat can see you by using a taller SMB. The OMS Safety Kit  II include a 6’ SMB which is ideal in rougher waters. The Safety Kit II includes:

• 6’ Slim SMB with an Open Bottom and one way valve
• 100’ Spool
• BigGrip™ Double-Ender Clip
• High Visibility Safety Pocket

Part# SL5012