Part# SL052

The Micro Wide Angle Dome Lens for Micro-series and ReefMaster RM-4K underwater cameras increases the camera’s field-of view by almost 50% and allowing photographers to get three times closer to the subject.

The Micro Wide Angle Dome Lens design uses high-grade optics arranged in a 4- element/4- group array that delivers crisp edge-to-edge sharpness. The internal elements are fully multi-coated optical glass. The dome lens is optical polycarbonate with hard, anti-scratch coating. The lens has a 13.3mm film-equivalent effective focal length when used with the SeaLife Micro 3.0 and is waterproof to 200ft/60m.

The lens fits all SeaLife Micro-series cameras (Micro HD, HD+, Micro 2.0, Micro 3.0) and also works with the SeaLife ReefMaster RM-4K increasing the tiny camera’s shooting angle to a massive 196°. The Micro Wide Angle Dome Lens increases the Micro 3.0 shooting angle by 43% to 143° (in air) and allows the user to get almost 3x closer to the subject.

The Micro Wide Angle Dome Lens is a “wet lens” and easily attaches and removes underwater. A locking ring prevents the lens from accidently detaching when bumped or in rougher water conditions.  The lens weighs 11.7 ounces (331 grams) and is negatively buoyant. A lanyard is included to prevent loss underwater and the lens can dock on the Lens Caddy (SL091) when not in use.

FEATURES

• Get 3x closer and 43% wider field-of-view
• Optical design corrects barrel distortion and improves edge-to-edge sharpness
• 0.7x wide-angle conversion
• Fully multi-coated optics for maximum light transmission
• Fits all SeaLife Micro-series and ReefMaster RM-4K cameras
• Easily attach/remove lens while underwater
• Attaches to SeaLife “Lens Caddy” Lens Holder (Item SL091)
• Precision 4-element/4-group high-grade optics (internal optical glass)
• Polycarbonate dome lens with scratch resistant hard coating
• Includes neoprene dome lens cover, rear lens cap and protective pouch
• Waterproof to 200ft / 60m

Part# MQD22-BU

Part# MDS28-BU

Are you tired of feeling like your hose is trying to push your regulator out of your mouth? Get a Miflex DS (Dual Swivel) hose and take comfort and flexibility to a new level.

• The 60º swivel ball joint on the second stage end eliminates the push and pull on the mouthpiece
• The 360º swivel on the first stage end prevents hose twisting and optimizes hose direction
• Increase comfort and reduce jaw fatigue
• Chromed brass construction with Viton O-rings
• Overall length = 28 in (71 cm)
• Approved for use with up to 40% oxygen

Part# MHP06-CN

Miflex HP hoses are 35% thinner (7.8 mm) and about half the weight of traditional rubber hoses. These quality hoses use electroless nickel plated brass fittings on both ends. They are approved for use with up to 40% oxygen.

FEMALE FITTING

7/16” x 20 female threads

Strain relief with shock absorber

14 mm deep airspool well

MALE FITTING

7/16” x 20 male threads

Strain relief with shock absorber

Green Viton O-ring

HOSE MATERIAL

Graphite carbon color

Less then 8 mm diameter

Braided nylon exterior layer

Part# MLP30-PR

Lightweight and flexible low pressure hoses

• Multi-layer construction
• Excellent resistance to abrasion
• Kink-resistant design
• Approved for use for use with up to 40% oxygen
• Individually tested at the factory
• EN250 approved
• Individually marked with the Miflex logo and date code
• Manufactured in Italy
• Inner liner is made from polyether-based polyurethane, not PVC, as found in lesser-priced imitators

Part# MXT22

Developed specifically for technical and professional divers, the XT-Tech hoses have a smooth outer layer and reduced flexibility compared to the Xtreme hoses.

• The smooth outer surface prevents abrasion around the neck
• Less flexibility and negative buoyancy allow the longer hoses to stay in place
• Outer polyester layer has Kevlar® yarn reinforcement to make the hose stronger and more durable
• Lighter in weight than traditional rubber hoses
• End fittings are made of sea water resistant electroless nickel plated brass
• Like all Miflex hoses, they are 100% leak tested and produced on fully automated assembly lines
• Inner liner is made from polyether based polyurethane, not PVC, as found in lesser-priced imitators
• Approved for use with up to 40% oxygen

Part# MXTQD09

Developed specifically for technical and professional divers, the XT-Tech hoses have a smooth outer layer and reduced flexibility compared to the Xtreme hoses.

• The smooth outer surface prevents abrasion around the neck
• Less flexibility and negative buoyancy allow the longer hoses to stay in place
• Outer polyester layer has Kevlar® yarn reinforcement to make the hose stronger and more durable
• Lighter in weight than traditional rubber hoses
• End fittings are made of sea water resistant electroless nickel plated brass
• Like all Miflex hoses, they are 100% leak tested and produced on fully automated assembly lines
• Inner liner is made from polyether based polyurethane, not PVC, as found in lesser-priced imitators
• Approved for use with up to 40% oxygen

Part# KN125

This smaller version of the FogCutter is the most popular model of them all! The compact size lends itself to multiple mounting options including hose mount, BC mount and webbed harness mount.

• The 3.25 in (83 mm) blade sports a snub-nosed, blunt tip
• The 420 stainless steel blade is hardened to hold the edge longer
• The serrated edge along back of blade is great for cutting rope
• A serrated pipe grip integrated into the handle is ideal for twisting stubborn items
• A butt cap, with attachment hole, located on the back, provides a hammering function
• Hose mount installed fits standard 0.5 in (13 mm) diameter hoses
• 6.5 in (165 mm) overall length
• Mini FogCutter includes:
• Hose mount adapter
• Two hook-and-loop straps
• Large mounting plate
• Small mounting plate
• Two thumb screws
• Four mounting screws

Part# AKC-11

Light weight retractor

Part# RG2762-NH

A clean, black and white face means the Mini Tech SPG is easy to read. This naked gauge has a 2-inch diameter with a 1.75-inch face (RG 2762-NH).

A Bourdon tube gauge, the Tech SPG is calibrated to 5000 PSI in 100 PSI increments (360 Bar in 10 Bar increments) for the highest level of accuracy. A tempered glass face is impact and scratch resistant, while the luminescent dial makes it easier to read in low light situations.

Comes standard as a naked SPG with a spool to attach a hose swivel to the gauge. A boot is available as a separate option, if desired. The Mini Tech SPG is suitable for oxygen service and is CE approved.

Part# HL502

Available as gauge only, or in kit form

The gauge will thread directly into a regulator’s first stage HP port

With a complete kit, it will thread onto the end of a HP hose

Kit includes gauge with rubber boot, in-line adapter and airspool

Gauge and airspool include Viton O-rings

Glow in the dark gauge faces

Attractive clamshell packaging (kit only)

Both the kit and the gauge only are available in either imperial or metric units

Imperial: 0 to 5000 psi

Metric: 0 to 350 bar

Part# 12.177.000

For divers seeking reliable performance in an uncomplicated air delivery system, the MK11 / S270 is easy to use, compact and durable. The balanced diaphragm MK11 delivers effortless airflow unaffected by depth, tank pressure or breathing rate. The compact S270 provides smooth breathing performance in a bulletproof anti-scratch design that’s able to handle years of hard use.

• Lightweight S270 casing, made of a fiberglass-reinforced nylon core and a special PU outer layer, is extremely durable plus helps reduce jaw fatigue and improves diving comfort
• Technopolymer plastic barrel with a metal thread and a balanced valve helps save weight and provides a surface that ice crystals can't grab onto when diving in extreme cold water.
• Air-balanced valve smoothes out the inhalation effort when diving at varying depths and supply pressures.
• Dive/predive switch is easy to use even wearing thick gloves.
• Compact and efficient exhaust tee minimizes exhalation effort
• Air-balanced diaphragm first stage design delivers constant and effortless airflow unaffected by depth, tank pressure, or breathing rate
• Chrome-plated marine grade brass body has sealed internal parts to prevent water and pollutants from fouling the inner mechanism while enhancing cold-water performance.
• Two high pressure, two low pressure and two high-flow LP ports maximize hose routing options

Part# 12.719.010

The MK19 EVO / A700 takes our extraordinary breathing A700 and pairs it with an environmentally sealed MK19 EVO first stage that’s extremely resistant to freezing and fouling of its inner mechanism. The MK19 EVO offers a dry ambient pressure chamber that is equipped with a double spring for optimum reliability, and a LP port swivel turret to maximize hose routing options. The muscular A700, with its precision handcrafted full-metal casing, front cover and valve housing, offers best-in-class breathing performance, including effortless inhalation and an ease of exhalation that is unmatched.

• Metal second stage case construction uses a larger diaphragm inside a compact casing, increasing breathing sensitivity
• Air balanced second stage valve smoothes out the inhalation effort when diving at varying depths and supply pressures.
• Sectional exhaust tee and a first-rate purge help to deliver effortless inhalation and an ease of exhalation that is unmatched.
• Easy-to-use, adjustable inhalation effort knob to achieve maximum, personalized comfort
• Super-flow hose features an oversized bore that allows more air to flow on each inhalation.
• Air-balanced first stage diaphragm delivers constant and effortless airflow unaffected by depth, tank pressure, or breathing rate
• Environmentally sealed system prevents water and pollutants from fouling the inner mechanism and is extremely resistant to freezing
• Dry chamber is equipped with a double spring making it more compact and reliable.
• Two opposing high pressure ports allow the first stage to be positioned either up or down, plus provide for an optimum hose/transmitter layout
• Swivel turret comes with four High-Flow LP ports plus one axial Super High-Flow LP port to maximize hose routing options for technical diving layouts

Part# 12.771.550

An upgrade to our popular G260 technical diving system, the MK25 EVO BT/G260 Carbon BT regulator system delivers greater durability with a carbon fiber cover and Black Tech finish. The balanced piston MK25 EVO BT offers excellent resistance to freezing, superb inhalation sensitivity and instant delivery of air on demand. The G260 Carbon BT, with its large diaphragm, internal metal components and high-flow exhaust valve for excellent breathing sensitivity and resistance to freezing, ratchets up its ruggedness with the addition of a carbon fiber front cover.

• Lightweight and extremely durable, carbon fiber can resist substantial shocks without damage.
• Both first and second stages feature a Black Tech scratch-resistant coating on metal parts that protects against the ravages of salt water and corrosion.
• Air balanced second stage valve smoothes out the inhalation effort at varying depths and supply pressures.
• A diver-adjustable inhalation effort knob fine-tunes air delivery to suit changing depths, water conditions and personal tastes, and a Venturi-Initiated Vacuum Assist (VIVA) dive/pre-dive switch prevents free flows in cold water or when used as an octopus.
• High-flow exhaust valve reduces exhalation for better overall breathing comfort, and the reversible hose attachment allows you to easily adjust hose routing for tech diving configurations.
• Super-flow hose features an oversized bore that allows more air to flow on each inhalation.
• Air balanced flow-through piston provides constant and effortless airflow unaffected by depth, tank pressure, or breathing rate.
• Patented XTIS (Extended Thermal Insulating system) insulates the inner mechanism from the environment, improving cold-water resistance and delaying ice formation in extreme cold-water conditions without compromising breathing performance.
• Two opposing high pressure ports allow the first stage to be positioned either up or down.
• Four high-flow and one axial super high-flow low pressure ports on a swivel turret maximize hose routing options.
• Includes a zippered fabric case complete with specially fitted padding to protect the regulator during storage and transport

Part# 12.620.300

Part# 12.620.000

SCUBAPRO combines its premium high-performance MK25 EVO first stage with its high-performance S620 Ti second stage to create a winning all-purpose, all weather regulator system. The MK25 EVO offers excellent resistance to freezing, superb inhalation sensitivity and instant delivery of air on demand. The S620 Ti embraces the best features of SCUBAPRO's renowned S600 in an upgraded, state-of-the-art design. Smaller and lighter than the S600 but using the same-sized diaphragm, the S620 Ti delivers effortless airflow under all dive conditions. The full titanium inlet tube is ultralight, the large purge button improves water circulation, and the reengineered exhaust tee increases performance while directing bubbles out of the field of view. In all water temperatures, in all dive conditions, this reg system is a winner.

• Air balanced flow-through piston in a chrome plated brass body provides constant and effortless airflow unaffected by depth, tank pressure, or breathing rate.
• Patented XTIS (Extended thermal Insulating system) thermally insulates the inner mechanism from the environment, improving cold-water resistance and delaying ice formation in extreme cold-water conditions without compromising breathing performance.
• Anti-freeze protection radically increases breathing reliability when diving in the most extreme water temperatures.
• Two opposing high pressure ports allow the first stage to be positioned either up or down.
• Four high-flow and one axial super high-flow low pressure ports on a swivel turret maximize hose routing options.
• External intermediate pressure adjustment enables technicians to fine-tune performance quickly and easily.
• Air balanced second stage valve smoothes out the inhalation effort at varying depths and supply pressures.
• Second stage’s rugged reinforced technopolymer case and front cover with stainless steel frame looks good plus is able to withstand years of aggressive diving.
• Full titanium barrel is rugged, anti-corrosion and lightweight for long-term reliability.
• Large diaphragm fits inside a more compact second stage casing for maximum breathing sensitivity.
• User controls include an easy-grip diver-adjustable inhalation effort knob and Venturi-Initiated Vacuum Assist (VIVA) lever.
• The compact Hi-Flow mouthpiece, exclusive to the S620 Ti, is mounted on an enlarged mouthpiece pipe to improve airflow as well as mouth comfort.

Part# SL911

Eats humidity, kills moisture. Protection against corrosion, fogging and mildew.
Fits perfectly into SeaLife underwater camera and phone housings as well as other brands of underwater camera housings.

Moisture Muncher Packs absorb moisture to prevent fogging and corrosion of your valuable electronics and cameras. Use inside an airtight storage case or container to create a perfect dry environment for your valuable items.

Important: Store the unused capsules in a small 100% airtight container until they will be used in a SeaLife housing. This assures maximum absorption power.

Each package contains ten (10) 1.5g capsules containing color indicating silica gel. When gel turns from blue to pink, full absorption has been reached.

Part# SOF812-797

• Manufactured by Molecular Products in the U.K.
• Used in recreational, technical, scientific, and military semi-closed and closed
diving rebreathers
• Also used in chambers, diving bells, gas reclamation systems and submarines.
• The 797 Grade, CD Grade, and Military D Grade ship in high-density polyethylene
(HDPE) resealable containers with 44 lb (20 kg) of product inside. Military L Grade
ships in 42 lb pails.
• Containers can maintain proper absorption capacity for 5 years. Each container
marked with an expiration date
• Sofnolime is shipped as ordinary non-hazardous product
• High attrition resistance (low dust formation)
• Follow your rebreather manufacturer’s recommendations for scrubber change
intervals
• Only use the specific absorbent recommended by your rebreather manufacturer
• The use of improper absorbent can cause excessive work of breathing and
shortened scrubber times

Part# HL310

Superior tilt potential of +/- 30°

Complete: compass module, bungee mount & bungee cord

30 in (76 cm) length of 4 mm bungee cord

Mount with one continuous loop or two separate loops for redundancy

Luminescent easy-to-read compass card

Top and side reading

Manufactured in Italy

Part# AC2199

A regulator necklace is an essential tool for advanced and technical divers. A necklace allows the diver to stow their backup or secondary regulator just under their chin for quick access if needed. Divers utilizing a regulator necklace typically subscribe to the ‘donate the primary regulator’ philosophy in an out-of-air scenario, with the primary regulator on a longer hose.

The Dive Rite Regulator necklace allows for easy size adjustment for a perfect fit. Simply tie an overhand knot at the desired length and trim the excess bungee. The knot recesses into the locking cone for a clean look. The necklace quickly installs onto the second stage by pulling both sides of the bungee to tighten the loop around the mouthpiece.

Personalize your gear with a splash of color. The Dive Rite Regulator Necklace is available in Red, Yellow, Blue, Pink, and Tech Diver Black.