Part# GM2050-7

Keep regulator hoses lying flat and avoid kinking with our Deluxe Hose Retainers. Our wide, 4-inch (10 cm) retainer band is made of a proprietary, stretch material used in bandages. The material holds up to salt water and dries quickly. Silicone strips on the inside of the band grip the tank and keep the Deluxe Hose Retainer from rolling. A 1" x 2" (2.5cm x 5cm) nylon pull tab makes accessing the hose retainer easy, even when using gloves.

Size large (GM2050-7) fits 7.25-inch (184 mm) and 8-inch (203 mm) diameter tanks. Size small (GM2050-5) fits 5.5-inch (127 mm) diameter tanks. Both size retainers come in black only. Made in the U.S.A.

Part# GM2050-5

Keep regulator hoses lying flat and avoid kinking with our Deluxe Hose Retainers. Our wide, 4-inch (10 cm) retainer band is made of a proprietary, stretch material used in bandages. The material holds up to salt water and dries quickly. Silicone strips on the inside of the band grip the tank and keep the Deluxe Hose Retainer from rolling. A 1" x 2" (2.5cm x 5cm) nylon pull tab makes accessing the hose retainer easy, even when using gloves.

Size large (GM2050-7) fits 7.25-inch (184 mm) and 8-inch (203 mm) diameter tanks. Size small (GM2050-5) fits 5.5-inch (127 mm) diameter tanks. Both size retainers come in black only. Made in the U.S.A.

Part# GM2051-LARGE

The Dive Rite EPDM Hose Retainers are a must have for any stage, deco, or sidemount bottle rigging. Using the proven durability of EPDM rubber, these 1" wide hose retainers will withstand the test of time and diving environments with their resistance to temperature, salt, chlorine, and anything else your diving environment has to offer. EPDM rubber maintains its elasticity thru extreme heat and cold, and will not slip on your cylinder when a hose is being stowed or deployed. A nylon pull tab makes it easy to stretch the hose retainer, even with gloves. Small size hose retainer (GM2051-Small) will work on cylinders 5.5" down to 4" diameter, large size hose retainer (GM2051-Large) will work on 6.9" thru 8" diameter cylinders.

Part# GM2051-SMALL

The Dive Rite EPDM Hose Retainers are a must have for any stage, deco, or sidemount bottle rigging. Using the proven durability of EPDM rubber, these 1" wide hose retainers will withstand the test of time and diving environments with their resistance to temperature, salt, chlorine, and anything else your diving environment has to offer. EPDM rubber maintains its elasticity thru extreme heat and cold, and will not slip on your cylinder when a hose is being stowed or deployed. A nylon pull tab makes it easy to stretch the hose retainer, even with gloves. Small size hose retainer (GM2051-Small) will work on cylinders 5.5" down to 4" diameter, large size hose retainer (GM2051-Large) will work on 6.9" thru 8" diameter cylinders.

Part# AC3258

The Dive Rite Line Cutter is the cutting tool that every diver should carry. Sharper than a standard dive knife, the line cutter uses a 420 surgical grade stainless steel blade that can easily cut thru braided line, monofilament, or any other line entanglement. Housed in a heavy-duty fiber reinforced nylon body, the blade is easily removed for cleaning and replacement. The line cutter fits securely into a 4 1/2" x 2 1/2" (11.4cm x 6.4cm) nylon pouch and uses a hook-and-loop lanyard to prevent the line cutter from accidentally deploying. The pouch is equipped with 2 hook-and-loop straps, allowing it to be mounted horizontally or vertically on webbing up to 2-inches (5.08 cm) wide.

Part# ES125-BLACK-GR

Low volume, two lens mask. The ES125 accommodates prescription and gauge reader lenses.

The ES125 Double Lens Mask is a low volume, low profile mask that provides an excellent range of vision. The split lens design allows the frame to sit low on the face, and is sealed by a soft, premium quality double seal silicone skirt. A high-impact plastic frame and tempered glass lenses will provide years of quality service.  Adjustable mask strap buckles result in a more comfortable fit. Protective storage box included.

The ES125 Double Lens Mask can be fitted with optical lenses in -1.0 thru -8.0 diopters available in 0.5 increments.   A +2.0 magnification gauge reader lens is also available for the ES125.  Gauge reader lenses use a ground in half-moon shaped magnifier in the bottom of the lenses.

Part# ES155 OD Green

A mask is one of the most important pieces of dive gear and we think the ES155 frameless mask is it. With exceptional visibility and superior comfort being in the forefront of the design, diving on a reef or exploring a cave or wreck couldn’t be more exhilarating. The wide angle of vision provided by the single lens and by not having the frame of the mask over the nose substantially increases overall underwater visibility. Seeing clearly underwater over the entire field-of-view is possible with the ES155’s ultra clear glass in its lens design. The glass is also tempered for safety if it should ever break.

The ES155 performs throughout any length of dive by not only allowing you to see exceptionally well underwater, but to do so in superior comfort. A soft matte silicone body with a double silicone face skirt makes for a comfortable fit on almost any size or shape face. The low volume and comfortable nose pocket make is easy to clear water from as well as pinch the nose for equalization. Holding the ES155 in place couldn’t be easier or more comfortable with the soft matte silicone strap and the easily adjustable mask strap buckles.

Included is a protective carry case that holds up even on the bottom of your dive bag. You don’t have to worry about breaking a mask strap buckle or damaging the skirt when stowing it in its protective case.

Part# ES155BLACK

A mask is one of the most important pieces of dive gear and we think the ES155 frameless mask is it. With exceptional visibility and superior comfort being in the forefront of the design, diving on a reef or exploring a cave or wreck couldn’t be more exhilarating. The wide angle of vision provided by the single lens and by not having the frame of the mask over the nose substantially increases overall underwater visibility. Seeing clearly underwater over the entire field-of-view is possible with the ES155’s ultra clear glass in its lens design. The glass is also tempered for safety if it should ever break.

The ES155 performs throughout any length of dive by not only allowing you to see exceptionally well underwater, but to do so in superior comfort. A soft matte silicone body with a double silicone face skirt makes for a comfortable fit on almost any size or shape face. The low volume and comfortable nose pocket make is easy to clear water from as well as pinch the nose for equalization. Holding the ES155 in place couldn’t be easier or more comfortable with the soft matte silicone strap and the easily adjustable mask strap buckles.

Included is a protective carry case that holds up even on the bottom of your dive bag. You don’t have to worry about breaking a mask strap buckle or damaging the skirt when stowing it in its protective case.

Part# RG2762-NH

A clean, black and white face means the Mini Tech SPG is easy to read. This naked gauge has a 2-inch diameter with a 1.75-inch face (RG 2762-NH).

A Bourdon tube gauge, the Tech SPG is calibrated to 5000 PSI in 100 PSI increments (360 Bar in 10 Bar increments) for the highest level of accuracy. A tempered glass face is impact and scratch resistant, while the luminescent dial makes it easier to read in low light situations.

Comes standard as a naked SPG with a spool to attach a hose swivel to the gauge. A boot is available as a separate option, if desired. The Mini Tech SPG is suitable for oxygen service and is CE approved.

Part# AC2199

A regulator necklace is an essential tool for advanced and technical divers. A necklace allows the diver to stow their backup or secondary regulator just under their chin for quick access if needed. Divers utilizing a regulator necklace typically subscribe to the ‘donate the primary regulator’ philosophy in an out-of-air scenario, with the primary regulator on a longer hose.

The Dive Rite Regulator necklace allows for easy size adjustment for a perfect fit. Simply tie an overhand knot at the desired length and trim the excess bungee. The knot recesses into the locking cone for a clean look. The necklace quickly installs onto the second stage by pulling both sides of the bungee to tighten the loop around the mouthpiece.

Personalize your gear with a splash of color. The Dive Rite Regulator Necklace is available in Red, Yellow, Blue, Pink, and Tech Diver Black.

Part# BC4650P-MED

The original expedition sidemount system.

The Nomad XT is Dive Rite’s expedition sidemount system. Built on a TransPac XT base, the versatile Nomad XT is not only suited for sidemount but can handle backmounted doubles, singles, or CCR.

The Nomad XT is built with the ultimate in streamlining in mind. A properly balanced sidemount rig should not require additional weight on the shoulders. Divers who wear heavy tanks or those just getting started with sidemount will often opt for this older solution to resolve trim issues. Seeing this makeshift solution in the field, we designed our expedition sidemount rig with a wing design to give it the best trim possible directly out of the box. Narrow at the neck and angled at the sides with more lift added to the bottom, the Nomad XT wing is designed to give lift where it’s most needed—at the hips.

The inflator is at the top center of the wing, behind the neck. Dual OPVs at the bottom of the wing allows for gas dumping from any angle. Divers can now swap the position of their inflator to route from the bottom and retain an OPV dump at the bottom of the wing for safe gas dumping when inverted.

Made with a super-tough exterior and modular flexibility, the outer panels of the wing are engineered using SuperFabric® brand technology for optimum resistance to punctures and abrasions, while remaining very flexible.

In addition to its rugged exterior, the Nomad XT has the added benefit of being a modular system: the harness, wing, butt plate, and crotch strap are all separate elements. This allows the traveling explorer (or any diver wishing to modify their rig) the ability to trade out wings, remove the butt plate, or make any fit adjustments necessary to meet the objective of the dive mission.

A Gusset Control System (GCS) allows you to control lift when switching out various types of cylinders, such as going from steel to aluminum or twin tanks to single. Without the Gusset Control and without using the wing keepers on the waist belt, the Nomad XT delivers a full 50 pounds of lift.

The Nomad XT includes Dive Rite’s Adjustable Bungee System, which allows for easy length adjustment to fit any diver without needing to tie knots. The Adjustable Bungee System also allows a diver to use any bungee configuration they desire including: ring bungee, loop bungee with snap, and loop bungee. A set of chokers are included for divers using Dive Rite’s ring bungee and choker method. The butt plate, made of reinforced nylon to provide the proper amount of rigidity to hold tanks in position and eliminate sag, along with two stainless steel rails, provides the lower attachment point for cylinders.

The Nomad XT Sidemount Rig comes assembled and includes a TransPac XT harness, Nomad XT wing, butt plate and 2-inch crotch strap, adjustable bungees, and chokers. Diver needs to specify TransPac size (M-XXL) when ordering. Available in single or dual bladder.

Made in the USA.

Part# RG5400

Simple, lightweight regulator for oxygen and deco mix use.

The Dive Rite Oxygen Decompression Regulator is a compact, lightweight option for a deco regulator. Assembled in a clean room using all oxygen-compatible materials and lubricants, this shallow water deco regulator can be used with higher concentrations of oxygen without the need for additional set-up.

Part# RP5400

Compact in size and lightweight.

The Dive Rite O2 Deco Regulator is a compact and streamlined solution designed specifically for shallow water decompression. Assembled in a clean room with oxygen-compatible materials, it is ready for use with higher oxygen concentrations straight out of the box. Featuring an unbalanced piston DIN first stage

• Unbalanced piston DIN first stage
• 140 PSI first stage OPV
• 2 LP Ports
• HP Port
• 12.4 oz (351.5 g)
• 3.5 in x 1.25 in (8.9 cm x 3.2 cm)
• Max Depth: 330 ft (100 m)
• Do not attempt to use for drysuit inflation at depths exceeding 330 ft (100 m)
• Do not attempt to use as a breathing regulator without proper cleaning and service. Failure to do so can result in serious personal injury or death

Part# RE4120

The Classic Safety/Cavern Reel  is one of the most versatile length reels in our line. With its 140-feet of line, it is the perfect reel for cavern divers and their limited penetration. As a cavern diver progresses into cave training the Classic Safety Reel can act as a jump or safety reel. Wreck divers have also adopted the Classic Safety reel as the perfect reel for shooting lift bags or marker buoys.

The Classic Safety Reel is available with 140 feet of braided #24 line in either white(RE4100) or orange(RE4120). It is also available with 90 feet of heavier braided #36 white line (RE4110).

The traditional design of the Classic Safety Reel is easy to use. A top mounted handle allows divers to easily hold the reel and a light in one hand while winding the reel with the other. An ergonomic T-top stainless lockdown screw positively locks the free spinning spool in place when needed, and a retaining screw ensures that the lockdown screw cannot back out all the way and be lost.

A medium sized bolt snap is used to secure the Classic Safety Reel to a D-ring on the diver. 

• White, DuPont fiber braid line provides strength and minimizes fraying.
• Orange, Dacron line does not stretch, keeping firm tension.
• Cave series reels use #24 braid line giving 220-lbs of breakage strength. Wreck series reels use #36 braid line giving 350-lbs of breakage strength.
• Injection molded polycarbonate spools resist breakage and cracking.
• Marine grade stainless steel frame and axle are corrosion resistant.
• Marine grade stainless steel bolt snap is corrosion resistant.
• T-top lockdown screw for easy grip
• 1.08 lb (0.49 kg)

Part# AC3212

Popular with divers for heavier cutting purposes, shears will easily cut thru just about any entanglement. Shears are constructed from marine grade stainless steel for better corrosion resistance. The heavy-duty nylon webbing sheath provides a secure fit for the shears. A high viz red quick-release hook-and-loop lanyard keep the shears firmly in place. Two webbing loops on the back of the sheath allow it be worn on a standard 2-inch waist belt or other smaller webbing. Shears are also sold individually (no sheath).

NOTE: Shears and sheath must be rinsed with freshwater and allowed to air dry after use to prevent corrosion to the blades. Corrosion and rusting are not covered under warranty.

Part# BC2118

An evolved design based on the tried and true original.

Our laser-cut, CNC deburred and electropolished XT backplate was designed with rounded corners to prevent pressure points and snagging. Built-in holes for for bungee allow divers to sidemount stage bottles without the need for modification, and slots for cam bands make it easy to carry a single tank with no need for an adapter. At 5.5 pounds, the XT backplate is perfect for diving with aluminum tanks, thick undergarments or anywhere extra weight is needed.

• 10 Gauge low carbon 316L Stainless Steel
• Laser cut, hand finished edges
• Electropolished and Laser Engraved
• 5.51 lbs (2.50 kg)
• 10.5 in (26.7 cm) at the widest point x 15 in (39.4 cm)
• 1.25 in (3.2 cm) depth (with contour)
• In-water buoyancy: -5.5 lbs (-2.5 kg)

Part# BC2119

All of the features with less weight.

Our laser-cut, CNC deburred and electropolished XT Lite backplate was designed with rounded corners to prevent pressure points and snagging. Built-in holes for bungee allow divers to sidemount stage bottles without the need for modification and slots for cam bands make it easy to carry a single tank with no need for an adapter. At 2.5 pounds, the XT Lite backplate is perfect for travel or anywhere you are trying to save weight.

• 14 Gauge low carbon 316L Stainless Steel
• Laser cut, CNC deburred edges
• Electropolished and Laser Engraved
• 2.61 lbs (1.18 kg)
• 5 in (26.7 cm) at the widest point x 15 in (39.4 cm)
• 25 in (3.2 cm) depth (with contour)
• In-water buoyancy: -2.5 lbs (-1.13 kg)

Part# T3350-LG

Wherever you want to go, the TransPac XT can get you there. 

The TransPac XT is our flagship harness, originally designed by Dive Rite CEO Lamar Hires for his early expeditions to the remote karst regions of Japan. On these expeditions, he needed a rugged harness system that would allow him to utilize backmounted doubles and a single tank, as well as sidemount in some of the smaller cave passages. In addition to being an incredibly versatile diving tool, the TransPac was also designed to be comfortable enough to hike tanks thousands of feet through dry cave passage.

SUPERIOR COMFORT

• Soft backplate. Flexible and comfortable on the back
• Wrap-around hip pads. Dual density foam pads provide cushioning and support and help distribute weight evenly across the hips  and back
• Ergonomic shoulder pads. Double-foam pads under the webbing strap provide padding comfort to the shoulder area
• Lumbar support pad. Molded foam pad contoured in the right places with mesh airflow channels provides added comfort and instant water draining when topside
• Chafe-free comfort. The padded shoulder straps and hip straps provide a chafe-free diving experience
• Backpacking style waist belt. Supports and balances weight across the hips and back for even distribution of weight in and out of the water
• Load distribution. The chest strap along with the crotch strap work together with the backpacking style waist belt and pivot ring shoulder straps to evenly distribute weight for maximum stability and comfort in the water

MAXIMUM ADJUSTABILITY

• Shoulder straps and waist strap: Easily adjustable in length to allow for diving any type of exposure suit
• Crotch strap (removable): Pull adjustment to set the exact length needed to accommodate any type of exposure suit
• Cross-chest strap: Buckles across the chest with a pull adjustment to fine tune the shoulder straps in the exact position desired
• Shoulder straps attach to the top of the backplate at pivot rings, allowing for easy adjustment
• Pull strap on the quick-release buckles between the shoulder straps and waist strap allow for fine adjustments and a perfect fit
• Shoulder strap attachment waist plates slide to allow for positioning on the waist strap at the desired location
• Waist webbing can be easily replaced allowing for many years of use

UNLIMITED VERSATILITY AND CUSTOMIZATION

• Dive a single tank, double tanks, a rebreather, or sidemount by simply swapping out the wing along with some additional mounting accessories
• Compatible with any XT or EXP wing in the Dive Rite line
• Add accessories like gear pockets, weight pockets, a line cutter, knife, or additional D-rings with ease

Part# PK3554-SS

Dive Rite - Transplate Doubles Package

We created this Dive Rite package to put everything you need for an awesome double or twin tank setup using the Dive Rite Transplate Harness and the Dive Rite doubles wing of your choice
 

Everything you need to get in the water from Dive Rite

• Tranplate Harness
• Class XT 60LB Wing or REC XT / EXP 45LB Wing
   
• XT or XT Lite Dive Rite Backplate
• 1.5 inch crotch strap with quick release

If you have any questions about any Dive Rite Products please let us know. We are happy to help get you all setup.

Part# AC3306

Ideal pocket to quickly add weight to any BCD. Perfect for travel or for adding trim weight to tank cam bands.

This versatile pocket holds up to four pounds of weight, which is ideal for those traveling to warm water destinations or divers who add weight to their tanks to perfect their trim. With a small footprint of three inches by four inches (7.6 cm by 10 cm), you’ll hardly even know it’s there.