Part# 04-0150-00

Venom Mask, Black/Gray

Part# 04-0155-00

Part# MA72BB

Part# BC4700-E-12

The Voyager Series wings include donut-shaped air cells for single-tank diving and provide divers with essential buoyancy control. With 35 pounds (15.8 kg) of lift, streamlined side panels, and a minimalistic, oval shape, the wings’ design provides maximum comfort throughout the dive with no squeezing or restrictions.

Part# AKM650MG

True, scuba quality mask in a junior size. Tempered glass. Liquid silicone-injected skirt and strap. Quality, easy adjust buckles. State-of-the-art design. 

Part# WS20150

Part# WP-G1-3-L

This stylish glove features a glide skin interior and a long zipper for easy donning. Polyurethane embossed section in the palm provides a non-slip grip and abrasion protection. The Glove-grip makes it a lot easier to put on the second glove.

Hypothermia vs Gloves.
The body reacts to cold and heat by adjusting the bloodstream to the external parts of the body, like hands, fingers and feet. “White Fingers” is a common condition and a proof for this ability to direct the blood flow. If you add restriction and squeeze into the equation these conditions can be worsened. Waterproofs G1 Glove series is constructed with all that knowledge in mind. Better fit, enhanced movability, less restriction and squeeze. All in one Glove.

FEATURES

• 3-D shaped
• Pre-bent fingers
• Glide skin seal
• Extra long YKK zipper
• Anti-slip palm grip
• Super-stretch nylon
• Bonded hi-quality nylon thread
• Reflective logo
• ID-plate

Part# WP-H1-3/5-L

The H1 5/3mm hood features a 5mm double layered protection in critical heat loss areas and glide skin seals for the neck and face. Waterproof H1 5mm includes the unique HAVS (Hood Air Venting System) which uses one-way valves to vent annoying air buildup in the hood.

• 3D Shaped
• Glide skin seal
• HAVS system (Hood Air Venting System)
• I-Span super-stretch nylon
• Bonded hi-quality nylon thread
• Available with or without bib

Part# WP-H2-3/5-XL

The H1 5/3mm hood features a 5mm double layered protection in critical heat loss areas and glide skin seals for the neck and face. Waterproof H1 5mm includes the unique HAVS (Hood Air Venting System) which uses one-way valves to vent annoying air buildup in the hood.

• 3D Shaped
• Glide skin seal
• HAVS system (Hood Air Venting System)
• I-Span super-stretch nylon
• Bonded hi-quality nylon thread
• Available with or without bib

Part# 7340018518023

W4 is the latest back-zip wetsuit design by Waterproof. After nearly 30 years of wetsuit-making experience, we have put all our knowledge into this high-quality suit with an eye-catching retro-futuristic design.

The 3D  design, with pre-bent arms and legs with stretch panels and gender specific construction ensures a comfortable fit and a relaxing body position in the water. 3D-moulded real rubber kneepads are perfect for the diving instructor who spends a lot of time on his/her knees in the water while teaching. Double smooth-skin seals at arms and legs, adjustable neck and a 10mm spinepad, and an extra seal at the back zipper work together to keep the cold water out. Seals are designed to fit WP boots and gloves. All zippers are in the top class Vislon from YKK. The Bronze slider in the back zipper ensures trouble-free function for many years.

It features ToughTex panels at elbows and knees, bonded HiQ Nylon thread and 100% CR neoprene in all panels – quality in every detail. The W4 also features double computer strap anchors with antislip, comfort front neck zipper, inner plush lining, and seat and shoulder antislip reinforcement.

The WPAD™, or the Waterproof Personal Accessory Dock, is a soft artfully constructed docking station located on the right thigh for our expandable pocket. The pocket is big enough to keep an extra mask, slate, deco tables, GoPro camera etc. Use the pocket when needed, if you want to streamline your set up, dive without it.

Features

• 100% microcell CR neoprene – More expensive but in fact the only neoprene that really works for diving. Excellent durability and insulation far better than other Neoprene qualities, like SBR, SCR etc.
• 3D kneepads – 3D moulded vulcanized rubber kneepads. Note the unique design that enables unrestricted leg movements via the “hinge effect”.
• 3D sculpted suit – With pre-bent arms and legs for maximuml fit.
• A seat that grips – Polyurethane embossing in the back provides a non-slip grip and integrated abrasion protection.
• APP – Waterproofs Advanced Performance Programme.
• Bronze slider – Provide consistent ease of operation and hardcore durability.
• Comfort zipper – Fully gusseted “comfort zipper” to relieve stress on the surface.
• Computer strap anchor – To prevent the computer from slipping off your arm when gloves are removed or suit is compressed. The anti-slip surface makes the computer stay in place.
• Double seals – Generous double seals made from smooth skin neoprene with zipper at arms and legs. YKK #10 Vislon zipper features a TA slider with an anti-slip designed zipper grip.
• Gender-specific styling – Provides comfortable lift and support for the female diver.
• High Visibility – High visibility is ensured by the reflective label.
• Moulded hook and loop fastener tab – A moulded tab with TPU teeth grips Japanese loop plush for maximum hold and good looks.
• Reinforced shoulders – Critical area abrasion and anti-slip protection.
• Spinepad – 10 mm thick and pre-shaped to fit neck area.
• ToughTex – On elbows and knees. Best way to armour your suit.
• WaveFlex arm panels – In hollow of arms provide an easier movement.
• WPAD™ – Waterproof Personal Accessory Dock, is an artfully constructed docking station located on the right thigh for a line of new accessories, like pockets.
• Zipper grip – An anti-slip designed knob for enhanced grip with or without gloves.

Part# WP-W25W-S

Part# 6430.4

The WD-4 Wide Angle Conversion Dome provides all of the benefits of a dome port underwater without the limitations.

The WD-4 simply slides onto the standard port of the Ikelite housing— no modification to or replacement of the housing's original port is necessary. The WD-4 can be removed and replaced underwater so there is no limit to the camera's zoom or macro capabilities. Approximately 3/4 of the camera's zoom range can be used with the dome in place.

The conversion dome corrects for the refractive magnification of the flat port underwater to restore the camera's original angle of coverage. For example, the WD-4 and Canon PowerShot G16 combination provides 28mm angle of coverage with incredibly crisp corners.

The WD-4 Wide Angle Dome is compatible with any Ikelite housing featuring a 3.9-inch diameter lens port. To check compatibility with Ikelite housings, please refer to the housing instruction manual or webpage.

The WD-4 Dome is only effective underwater. It requires water between the back of the WD-4 and the front of the housing's lens port to affect the angle of coverage. Like any wide angle wet lens, it may be used for split shots (half-in, half-out of the water), but there will be two water lines: one in front of the dome and one behind.

The WD-4 Wide Angle Dome is not compatible with external color filters.

Part# WK-BK

Keep your weights positioned where needed

Heavy-duty Delrin material

2 in (50 mm) slots, with serrations, for slip-free security

Part# WB101QA

Same design as Single Weight Pocket (p/n WB101), except:

Allows pocket to be quickly added without having to slide over the end of webbing

Quick attachment with double hook-and-loop closure at bottom of pocket

Designed to add up to 5 lbs (2.25 kg) of bagged shot or hard weight

Easy addition to XS Scuba weight belts or other harness systems

Perfect for adjusting your trim

Available in two colors

Part# WB101QR

Hook-and-loop release weight dump - pull out, then down

Designed to add up to 5 lbs (2.25 kg) of bagged shot or hard weight

Attaches by sliding over the end of any 2 in (50 mm) webbing

Easy addition to XS Scuba weight belts or other harness systems

Perfect for adjusting your trim

Part# 45.070.000

Part# 32.002.000

For divers looking for an ultra-compact cutting tool that takes up very little space but gets the job done when it’s time to do some slicing, there's SCUBAPRO's WHITE TIP. Made of 304-grade hard-tempered stainless steel, the WHITE TIP's blade provides both an excellent cutting edge and good resistance to surface oxidation. It includes a serrated edge for sawing through rope, a conventional edge for making clean slicing cuts, and an angled Tanto tip, one of the strongest knife points available. A slot in the handle provides a place to string a lanyard. The WHITE TIP is the perfect compact knife to attach to a hose or your BCD as a primary knife, or stow in an easy-to-reach pocket as a back-up tool.

• Classic stainless steel blade features both conventional and serrated cutting edges.
• Compact size means it can fit just about anywhere.
• Tanto tip increases cutting versatility.
• Includes locking sheath and kit for BCD/hose attachment.

Part# 9306.02

The optional Wide Angle Port M67 for Sony RX100 VI and RX100 VII # 9306.02 can be used in place of the housing's standard port for use of 67mm threaded external wide angle wet lenses. This port has been optimized to provide the best combination of wide angle and macro photography. The shorter port length accommodates an effective zoom range of 24-70mm.

This port is optimized for use with wide angle wet lenses designed for the 28mm equivalent focal length, including the INON UWL-H100, Ikelite W-30, Nauticam WWL-1, and others.  Some vignetting (dark shadows around the edges of the image will be present at wider focal lengths. We recommend zooming to eliminate vignetting or cropping your images in post-production.

The front of the port also accepts 67mm threaded macro wet lenses. Compatible wet lenses include but are not limited to the INON UCL-165, Subsee Magnifier, Saga close up lenses, Nauticam CMC-1, and others.

The standard lens port is removed and the Wide Angle Port M67 simply threads into the front of the housing for quick and easy installation. The camera cannot be zoomed past 70mm with this port attached. The camera will shut down if zoomed past this point.

Compatibility

Ikelite Housing # 6116.18

Part# AKWS289T-05

3MM BACK ZIP WETSUIT
Our Quantum Stretch neoprene makes this wetsuit easy to put on and remove, while offering maximum mobility in warm waters. This form fitting 3mm back zip delivers style, comfort, and warmth.

DETAILS
• Saltwater resistant zipper
• Quantum Stretch material
• Abrasion-resistant kneepads
• Glued and blind stitched
• Back zipper with long pull cord

AVAILABLE SIZES
Sizing Women: 5/6, 7/8, 9/10, 11/12, 13/14, 15/16

Part# AKWS139T-05

With short sleeves and legs this extremely versatile 3mm nylon II neoprene suit offers superb mobility without sacrificing core warmth attributes. This suit utilizes flat-lock stitching throughout.

YKK #10 brass zipper. Our unique zipper design utilizes dual rubber strips to additionally seal the zipper opening when closed, creating a water resistant closure. In addition, our low profile zipper flap folds over a closed zipper to further seal and secure the zipper in its closed position. The reinforced pull loop at the base of the zipper makes self-donning of the suit fast and easy.