Part# TA-0902-BK

The TA0902 Universal Bungee Straps provides absolute comfort for all divers. The “one size fits all” strap offers adjustability to fit all foot sizes. The Comfort Flex Hinge allows more mobility than tradition bungee and spring straps. A generous rubber heal grip holds secure to the foot while the easy access finger loop aids in donning and doffing the fin. 

>	Adjustable bungee strap
>	One size fits all with five (5) adjustable positions
>	Comfort-flex hinge
>	Will fit on most open heel fins available on the market
>	Rubber heel grip with finger loop for easy fit

Part# 47012

Vacuum valve fitting for any housing with a spare 1/2" accessory port. Additionally, it can be installed in place of the 1/4-20 top mount featured on all DSLR housings produced since 2009.

The valve's low profile avoids interference with control operation. The included waterproof plug is secured to the fitting to prevent accidental loss. Includes vacuum pump with gauge.

This valve is installed quickly and easily by securing one nut on the inside of the housing. The housing does not need to be returned to the factory for installation.

Compatibility

Most newer housings with an opaque white front feature a spare 1/2-20 threaded accessory port. The plug of this spare port may be replaced with this vacuum valve.

Additionally, it can be installed in place of the 1/4-20 top mount featured on all DSLR housings produced since 2009.

Part# 47011

A vacuum leak detection system allows you to check for leaks after assembling your housing and prior to entering the water. This can make the difference between a successful dive and a stressful situation.

Our new pump is designed to be more compact, ergonomic, durable, and faster to get to the recommend pressure of 10 mmHg.

Our 200DL and 50DL housings ship with a compatible vacuum valve pre-installed. Optional vacuum valve and pump kits are available for most housings that do not come with a valve.

Part# 04-0151-00

Part# 04-0150-00

Venom Mask, Black/Gray

Part# 04-0155-00

Part# MA72BB

Part# BC4700-E-12

The Voyager Series wings include donut-shaped air cells for single-tank diving and provide divers with essential buoyancy control. With 35 pounds (15.8 kg) of lift, streamlined side panels, and a minimalistic, oval shape, the wings’ design provides maximum comfort throughout the dive with no squeezing or restrictions.

Part# AKM650MG

True, scuba quality mask in a junior size. Tempered glass. Liquid silicone-injected skirt and strap. Quality, easy adjust buckles. State-of-the-art design. 

Part# WS20150

Part# WP-G1-3-L

This stylish glove features a glide skin interior and a long zipper for easy donning. Polyurethane embossed section in the palm provides a non-slip grip and abrasion protection. The Glove-grip makes it a lot easier to put on the second glove.

Hypothermia vs Gloves.
The body reacts to cold and heat by adjusting the bloodstream to the external parts of the body, like hands, fingers and feet. “White Fingers” is a common condition and a proof for this ability to direct the blood flow. If you add restriction and squeeze into the equation these conditions can be worsened. Waterproofs G1 Glove series is constructed with all that knowledge in mind. Better fit, enhanced movability, less restriction and squeeze. All in one Glove.

FEATURES

• 3-D shaped
• Pre-bent fingers
• Glide skin seal
• Extra long YKK zipper
• Anti-slip palm grip
• Super-stretch nylon
• Bonded hi-quality nylon thread
• Reflective logo
• ID-plate

Part# WP-H1-3/5-L

The H1 5/3mm hood features a 5mm double layered protection in critical heat loss areas and glide skin seals for the neck and face. Waterproof H1 5mm includes the unique HAVS (Hood Air Venting System) which uses one-way valves to vent annoying air buildup in the hood.

• 3D Shaped
• Glide skin seal
• HAVS system (Hood Air Venting System)
• I-Span super-stretch nylon
• Bonded hi-quality nylon thread
• Available with or without bib

Part# WP-H2-3/5-XL

The H1 5/3mm hood features a 5mm double layered protection in critical heat loss areas and glide skin seals for the neck and face. Waterproof H1 5mm includes the unique HAVS (Hood Air Venting System) which uses one-way valves to vent annoying air buildup in the hood.

• 3D Shaped
• Glide skin seal
• HAVS system (Hood Air Venting System)
• I-Span super-stretch nylon
• Bonded hi-quality nylon thread
• Available with or without bib

Part# 7340018518023

W4 is the latest back-zip wetsuit design by Waterproof. After nearly 30 years of wetsuit-making experience, we have put all our knowledge into this high-quality suit with an eye-catching retro-futuristic design.

The 3D  design, with pre-bent arms and legs with stretch panels and gender specific construction ensures a comfortable fit and a relaxing body position in the water. 3D-moulded real rubber kneepads are perfect for the diving instructor who spends a lot of time on his/her knees in the water while teaching. Double smooth-skin seals at arms and legs, adjustable neck and a 10mm spinepad, and an extra seal at the back zipper work together to keep the cold water out. Seals are designed to fit WP boots and gloves. All zippers are in the top class Vislon from YKK. The Bronze slider in the back zipper ensures trouble-free function for many years.

It features ToughTex panels at elbows and knees, bonded HiQ Nylon thread and 100% CR neoprene in all panels – quality in every detail. The W4 also features double computer strap anchors with antislip, comfort front neck zipper, inner plush lining, and seat and shoulder antislip reinforcement.

The WPAD™, or the Waterproof Personal Accessory Dock, is a soft artfully constructed docking station located on the right thigh for our expandable pocket. The pocket is big enough to keep an extra mask, slate, deco tables, GoPro camera etc. Use the pocket when needed, if you want to streamline your set up, dive without it.

Features

• 100% microcell CR neoprene – More expensive but in fact the only neoprene that really works for diving. Excellent durability and insulation far better than other Neoprene qualities, like SBR, SCR etc.
• 3D kneepads – 3D moulded vulcanized rubber kneepads. Note the unique design that enables unrestricted leg movements via the “hinge effect”.
• 3D sculpted suit – With pre-bent arms and legs for maximuml fit.
• A seat that grips – Polyurethane embossing in the back provides a non-slip grip and integrated abrasion protection.
• APP – Waterproofs Advanced Performance Programme.
• Bronze slider – Provide consistent ease of operation and hardcore durability.
• Comfort zipper – Fully gusseted “comfort zipper” to relieve stress on the surface.
• Computer strap anchor – To prevent the computer from slipping off your arm when gloves are removed or suit is compressed. The anti-slip surface makes the computer stay in place.
• Double seals – Generous double seals made from smooth skin neoprene with zipper at arms and legs. YKK #10 Vislon zipper features a TA slider with an anti-slip designed zipper grip.
• Gender-specific styling – Provides comfortable lift and support for the female diver.
• High Visibility – High visibility is ensured by the reflective label.
• Moulded hook and loop fastener tab – A moulded tab with TPU teeth grips Japanese loop plush for maximum hold and good looks.
• Reinforced shoulders – Critical area abrasion and anti-slip protection.
• Spinepad – 10 mm thick and pre-shaped to fit neck area.
• ToughTex – On elbows and knees. Best way to armour your suit.
• WaveFlex arm panels – In hollow of arms provide an easier movement.
• WPAD™ – Waterproof Personal Accessory Dock, is an artfully constructed docking station located on the right thigh for a line of new accessories, like pockets.
• Zipper grip – An anti-slip designed knob for enhanced grip with or without gloves.

Part# WP-W25W-S

Part# 6430.4

The WD-4 Wide Angle Conversion Dome provides all of the benefits of a dome port underwater without the limitations.

The WD-4 simply slides onto the standard port of the Ikelite housing— no modification to or replacement of the housing's original port is necessary. The WD-4 can be removed and replaced underwater so there is no limit to the camera's zoom or macro capabilities. Approximately 3/4 of the camera's zoom range can be used with the dome in place.

The conversion dome corrects for the refractive magnification of the flat port underwater to restore the camera's original angle of coverage. For example, the WD-4 and Canon PowerShot G16 combination provides 28mm angle of coverage with incredibly crisp corners.

The WD-4 Wide Angle Dome is compatible with any Ikelite housing featuring a 3.9-inch diameter lens port. To check compatibility with Ikelite housings, please refer to the housing instruction manual or webpage.

The WD-4 Dome is only effective underwater. It requires water between the back of the WD-4 and the front of the housing's lens port to affect the angle of coverage. Like any wide angle wet lens, it may be used for split shots (half-in, half-out of the water), but there will be two water lines: one in front of the dome and one behind.

The WD-4 Wide Angle Dome is not compatible with external color filters.

Part# WK-BK

Keep your weights positioned where needed

Heavy-duty Delrin material

2 in (50 mm) slots, with serrations, for slip-free security

Part# WB101QA

Same design as Single Weight Pocket (p/n WB101), except:

Allows pocket to be quickly added without having to slide over the end of webbing

Quick attachment with double hook-and-loop closure at bottom of pocket

Designed to add up to 5 lbs (2.25 kg) of bagged shot or hard weight

Easy addition to XS Scuba weight belts or other harness systems

Perfect for adjusting your trim

Available in two colors

Part# WB101QR

Hook-and-loop release weight dump - pull out, then down

Designed to add up to 5 lbs (2.25 kg) of bagged shot or hard weight

Attaches by sliding over the end of any 2 in (50 mm) webbing

Easy addition to XS Scuba weight belts or other harness systems

Perfect for adjusting your trim

Part# 45.070.000