Part# SST2CPACSXLGE
The Titanium T2 Chillproof range provides maximum warmth. This revolution in thermal protection provides all the properties of traditional Chillproof plus the added benefit of titanium nano-technology that both captures and generates Far Infrared (FIR) energy to keep you warm and provide improved metabolic function for better recovery and health.
Your bodies extremities lose heat rapidly so need protection from the cold. T2 Chillproof socks are 100% warm and super toasty, and keep your feet dry by wicking the moisture away. Use them under your boots or by themselves to keep your feet warm for all watersports.
Titanium T2 Chillproof garments are windproof, lightweight, neutrally buoyant and provide the warmth of a 4-5mm traditional wetsuit. Replace your wetsuit in warm waters or layer-up with Sharkskin T2 for extra insulation in cold waters.
Technical Specifications -
- Titanium Far Infrared nano-technology
- Breathable 10K+ membrane
- 100% windproof
- High quality abrasion resistant outer
- 4-way stretch for flexibility
- Neutrally buoyant
- Hollow fibre fleece
- Dries quickly when being worn
- Water repellent DWR treatment
- Anti-microbial for odour resistance
- UPF50+ for sun protection
Designed to last
We source the world’s most technically advanced materials, create the highest quality design and utilize the best manufacturing techniques to create garments that are built to last.
Eco Friendly
At SHARKSKIN we are passionate about watersports activities and we care about minimising our impact on the environment. We use biodegradable and compostable packaging bags, minimise waste in our manufacturing and design long lasting products.
Sharkskin Performance Guarantee
SHARKSKIN garments come with a 2-year guarantee on workmanship. Excludes fading and degeneration as a result of excessive exposure to chlorine or sunlight. We guarantee SHARKSKIN will perform as advertised.
Part# AKB1120RG
SLING DRY BACKPACK
The Tanami is water resistant, durable, and easy to wipe clean. The roll top opening makes it easy to fill with gear. Comfortable and durable, the Tanami is perfect to bring on a hike, to the beach or on the boat. This stylish and durable sling pack is the army knife of dry backpacks. The Tanami stays dry and can be used for travel, gear storage, adventures or even to use as an everyday bag.
DETAILS
•Welded seam construction to seal out water
•Roll top and buckle closure
•PVC
•Shoulder strap
•Volume: 20 Liters
•Exterior Dimensions: 23” tall X 12” wide X 8” deep
•Limited Two Year Warranty
•Available Colors: Heather Grey, Rugged Green
Part# 112002C-00
TDI eLearning Code Advanced Nitrox. Tuition for this class is $395.00
Part# 112003C-00
TDI Elearning Code Decompression Procedures. Tuition for this class is $425.00
Part# 112024C
TDI eLearning Code Intro to Tech. Tuition for this class is $250.00
Part# HL949
These heavy-duty split rings have a nice oval, teardrop shape. Made from polished 304 stainless steel so they will not rust.
1.5 in (38 mm) long x 1 in (25 mm) wide
Part# 15313
Tern TX x Swift Bundle includes Tern TX & Swift Transmitter
Designed with the sport diver in mind, the new Tern TX models are powerful, simple, reliable, and the most compact dive computers we have ever brought to market. The range includes the Shearwater Tern and the enhanced Tern TX, which boasts transmitter-enabled diving, capable of connecting with up to four Swift gas pressure transmitters and includes a digital compass for superior underwater navigation.
With a watch-style form factor, the 1.3” diameter AMOLED screen provides crystal-clear visibility in a variety of lighting conditions, making it easier than ever for divers to keep track of their crucial information. The vibrant, best in class high-resolution display offers Shearwater’s renowned user interface that provides divers with at-a-glance access to vital data, ensuring a safer and more enjoyable diving experience.
“Building upon the success of the Peregrine and borrowing features from the Teric, the Tern and Tern TX make a great addition to our product line. The Tern is an affordable option for anyone seeking a compact sport diving computer.” Said Jason Leggatt, CEO of Shearwater Research Inc. “As well, we are excited to bring transmitter-enabled computers to more divers, delivering precision gas pressure information on a brilliant display. The Tern TX is an incredible sport diving computer to those seeking a comfortable, round form. In combination with the Swift Transmitter, the Tern TX offers a world-class transmitter-enabled system at an attractive price”.
Designed and built in Canada, The Tern & Tern TX are depth rated to 120 meters and tested to engineering EN standards for dive computer compliance. Tern and Tern TX support Air, Nitrox, 3 Gas Nitrox, Gauge, and Freedive modes.
Shearwater Swift AI Transmitter
Multi transmitter capabilities
LED Status Indicator
Rated Air Pressure 300 bar/ Depth 200msw
User replaceable CR2 Battery
Compatible with pre-exisiting & current Shearwater AI
computers
Available with all-new Shearwater Remora™ quick connect bands, divers can easily switch between long and short straps, or the color strap of their choice.
Part# 14-0101-3P
When you took dive lessons you learned to perform specific skills to make you safe and comfortable underwater and at the surface. One of those skills was buoyancy control. Once you start diving for fun you use your buoyancy control device constantly throughout the dive. Your octopus or alternate air source device on the other hand is never used unless there is an emergency out of air situation. Reacting properly in an out of air emergency can make the difference between a safe dive and a tragedy. If your alternate air source and your BCD inflator device are one and the same, you will always know where to find it in an emergency.
The SS1 is the newest and most sophisticated product of its type, taking the concept to new levels of convenience, reliability and performance. It contains a high-flow second stage that performs on the same level as many high-performance regulators. It will deliver high flow rates to a diver at depth with a minimum of effort. It is, however very stable and not prone to unnecessary free-flow or leakage from water movement while swimming, or during entries or exits. The inflator/deflator is easy to operate with soft surfaced buttons placed where they can be easily operated with one hand.
One of the most unique features of the SS1 is its adaptability to almost any BCD. Atomic has designed a set of adapters (patent pending) to fit virtually every poplar BCD brand available. The adapters also include components for attaching the cable exhaust feature of your existing BCD (if applicable). The SS1 features a quick disconnect not only on the low-pressure hose, but the BCD hose as well. The adapters that fit the SS1 to the BCD are connected to the SS1 with a threaded collar that can be easily unscrewed to detach it completely from the BCD. Now you can carry or store the SS1 with your primary regulator and gauges (patent pending).
The SS1 combines the functions of the inflator and octopus regulator into a single unit. This reduces the overall bulk and weight of your dive gear; eliminates hoses, and places your back-up regulator in a fixed, familiar location. This time proven concept is a convenient and efficient alternative to the dedicated octopus second stage. Reduce your rig by one hose with the high performance Atomic SS1. The high-flow, low-pressure disconnect is interchangeable with many other models yet smaller size and lighter in weight. Large oversized and ergonomically shaped buttons are easy to find for pneumatic or oral inflation/deflation. They are easy to distinguish and faced with soft tactile rubber surfaces.
The elliptically shaped body of the SS1 lies flat against the BCD keeping it out-of-the-way and reducing drag. Seat wear is the first cause of regulator leaks and performance degradation. The stainless-steel dynamic orifice is pressure energized and only contacts the rubber seat when in use. Equipped with a titanium lever this high-strength metal part is the link to your air supply and will never fail due to rust or corrosion. The integrated purge cover is a one-piece flexible cover allows purge of the regulator when depressed anywhere on the cover surface.
The SS1 has 316-grade stainless-steel inflation/deflation stem, quick disconnect, demand valve body, orifice and springs. The mouthpiece and diaphragm are silicone rubber and the SS1 body is manufactured from fiberglass reinforced nylon. The SS1 is a dependable downstream demand valve design. The SS1 weighs 7 oz. (200 g) without the hose and the 3/8" threaded hose also weighs 7 oz. (200 g) and measures 28" (71cm) in length. The SS1 comes with an owner's manual.
Warranty Information
This product has a limited lifetime warranty.
http://www.atomicaquatics.com/warranty.html
714-375-1433
Atomic Safe Second Inflator (SS1), Stainless Steel Features
- Atomic Safe Second Inflator (SS1), Stainless Steel:
- Increased Safety In-Out-of-Air Emergencies
- Lightweight, Streamline, Eliminates Backup-Regulator (Octopus)
- Easily-Operated with One-Hand
- Convenience, Reliability and Performance
- High Flow Second Stage
- Stable Not Prone to Free-Flow or Leakage from Water Movement
- High Flow Rates to Diver at Depth w/Minimum of Effort
- Soft-Surfaced Buttons
- Adaptability to Almost Any BCD w/Included Set-of-Adapters
- Quick Disconnect BCD Hose: Easily Unscrewed-to-Detach It Completely from BCD
- Carry or Store the SS1 w/Primary Regulator and Gauges
- Inflator and Octopus Regulator inSingle Unit
- Reduces-the-Overall Bulk and Weight of your Dive Gear
- Eliminates Octopus Hose: Reduce Rig by One-Hose
- Convenient & Efficient Alternative to Dedicated-Octopus Second Stage
- Large Oversized and Ergonomically-Shaped Buttons
- Easy-to-Find for Pneumatic or Oral Inflation/Deflation
- Elliptically-Shaped Body Lies-Flat Against BCD Keeping
- Body Design: Out-of-the-Way and Reducing Drag
- Stainless Steel Dynamic Orifice is Pressure Energized
- Titanium Lever: High-Strength Metal Will Never-Fail Due to Rust or Corrosion
- Integrated Purge Cover, One-Piece Flexible Cover, Depress Anywhere on Cover Surface
- 316 Grade Stainless Steel:
Inflation/Deflation Stem
Quick Disconnect
Demand Valve Body
Orifice and Springs - Silicone Rubber Mouthpiece and Diaphragm
- Housing: Durable Fiberglass Reinforced Nylon
- Dependable Downstream Demand Valve Design
- Weight with Hose: 14 oz. (400 g)
- Hose Length: 28" (71cm) with Standard 3/8" Threads
- Owner's Manual
Part# SN056MG
The Tiga Dry Snorkel uses the latest dry snorkel technologies to provide the diver with an easy breathing and most importantly a dry experience. The streamlined base provides a reservoir of space for air to flow freely from the tube to the mouthpiece without restriction. The oversize purge valve allows easy clearing of the snorkel. The 100% liquid silicone mouthpiece and flex tube ensure comfort in every situation.
FEATURES
- Now comes standard with the Sherwood EZ Bite Mouthpiece
- Smooth operating dry ball chamber
- Deep base receptacle captures water without impacting breathing experience
- Easy to use snorkel keeper
Part# SST2CPLPSML
SHARKSKIN's new Titanium 2 product range offers outstanding thermal protection tested equivalent to 5mm neoprene and can be worn as your primary exposure protection in waters down to 68° F (20° C).
Sharkskin's legendary Chillproof material has been embedded with nanoparticles of titanium that capture and retain significantly more body heat. The inner layer features a "hollow yarn" fleece that holds and warms water next to the skin while in the water. The middle technical layer is a one-way membrane that regulates body temperature on the surface by keeping out wind and water but allowing water from the inner layer to wick rapidly away from the body. The new, updated outer layer is a nylon/lycra blend with exceptional four-way stretch, is abrasion resistant and has a water-repellant finish that sheds water.
Part# SST2CPLSFZ06 (US0)
SHARKSKIN's new Titanium 2 product range offers outstanding thermal protection tested equivalent to 5mm neoprene and can be worn as your primary exposure protection in waters down to 68° F (20° C).
Sharkskin's legendary Chillproof material has been embedded with nanoparticles of titanium that capture and retain significantly more body heat. The inner layer features a "hollow yarn" fleece that holds and warms water next to the skin while in the water. The middle technical layer is a one-way membrane that regulates body temperature on the surface by keeping out wind and water but allowing water from the inner layer to wick rapidly away from the body. The new, updated outer layer is a nylon/lycra blend with exceptional four-way stretch, is abrasion resistant and has a water-repellant finish that sheds water.
Part# 04.8000.02
This transmitter works on most Oceanic, Hollis, Aeris and Shearwater wireless air intergrated dive computers.
Part# T3350-LG
Wherever you want to go, the TransPac XT can get you there.
The TransPac XT is our flagship harness, originally designed by Dive Rite CEO Lamar Hires for his early expeditions to the remote karst regions of Japan. On these expeditions, he needed a rugged harness system that would allow him to utilize backmounted doubles and a single tank, as well as sidemount in some of the smaller cave passages. In addition to being an incredibly versatile diving tool, the TransPac was also designed to be comfortable enough to hike tanks thousands of feet through dry cave passage.
SUPERIOR COMFORT
- Soft backplate. Flexible and comfortable on the back
- Wrap-around hip pads. Dual density foam pads provide cushioning and support and help distribute weight evenly across the hips and back
- Ergonomic shoulder pads. Double-foam pads under the webbing strap provide padding comfort to the shoulder area
- Lumbar support pad. Molded foam pad contoured in the right places with mesh airflow channels provides added comfort and instant water draining when topside
- Chafe-free comfort. The padded shoulder straps and hip straps provide a chafe-free diving experience
- Backpacking style waist belt. Supports and balances weight across the hips and back for even distribution of weight in and out of the water
- Load distribution. The chest strap along with the crotch strap work together with the backpacking style waist belt and pivot ring shoulder straps to evenly distribute weight for maximum stability and comfort in the water
MAXIMUM ADJUSTABILITY
- Shoulder straps and waist strap: Easily adjustable in length to allow for diving any type of exposure suit
- Crotch strap (removable): Pull adjustment to set the exact length needed to accommodate any type of exposure suit
- Cross-chest strap: Buckles across the chest with a pull adjustment to fine tune the shoulder straps in the exact position desired
- Shoulder straps attach to the top of the backplate at pivot rings, allowing for easy adjustment
- Pull strap on the quick-release buckles between the shoulder straps and waist strap allow for fine adjustments and a perfect fit
- Shoulder strap attachment waist plates slide to allow for positioning on the waist strap at the desired location
- Waist webbing can be easily replaced allowing for many years of use
UNLIMITED VERSATILITY AND CUSTOMIZATION
- Dive a single tank, double tanks, a rebreather, or sidemount by simply swapping out the wing along with some additional mounting accessories
- Compatible with any XT or EXP wing in the Dive Rite line
- Add accessories like gear pockets, weight pockets, a line cutter, knife, or additional D-rings with ease
Part# T3550-MED
Get the best of both worlds.
A hybrid harness designed for divers who want the support of a backpack-style harness for better weight-load distribution, yet wish to dive a hard metal backplate. Designed like a mountaineer’s backpack, the TransPlate harness disperses weight across the hips and back, minimizing shoulder strain. When used with a 6-pound steel backplate, divers can remove or minimize weight pockets. Adjustable straps adapt to a wide variety of exposure suits and means easy donning and doffing. The modular design allows for customization with a wide variety of pockets and accessories.
Note: Stainless steel backplates, XT Lite backplates, and cam straps are sold separately.
- Made in USA
- Available in sizes Medium through XXL
- Shoulder pads constructed of 1000 denier ballistic nylon fabric for tear and abrasion resistance. 2-inch (50 mm) nylon webbing rated at 7,000 lbs breaking strength forms the shoulder straps and waist strap
- Four 2-inch D-rings on each shoulder strap are slightly bent for improved access and placement can be adjusted. Note: Size Medium has only one 2-inch D-ring per shoulder strap due to space limitations
- Marine Grade 316 stainless steel hardware is used throughout including: (2) bent D-rings on each shoulder strap (except Size Medium that has only one bent D-ring per shoulder) and (2) waist D-rings, XT chest plates, belt buckle, cam strap buckles, and side plates
- Shoulder straps feature pivot rings at chest level for comfort, fit, and load distribution
- Acetyl resin engineered plastic quick release buckles on shoulders for easy doff and don
- 1-inch nylon webbing rated at 2,200 lbs breaking strength and a Delrin 1-inch quick release buckle are used for a chest strap
- Marine grade stainless steel base plates allow for proper placement of shoulder straps. Plates can be moved forward or backward on the waist strap to get the best fit and performance
- Medium: 2 lbs, 7 oz (1.10 kg), Large: 2 lbs, 8 oz (1.16 kg), XL: 2 lbs, 9 oz (1.16 kg), XXL: 3 lbs (1.36 kg)
Part# PK3554-SS
Dive Rite - Transplate Doubles Package
We created this Dive Rite package to put everything you need for an awesome double or twin tank setup using the Dive Rite Transplate Harness and the Dive Rite doubles wing of your choice
Everything you need to get in the water from Dive Rite
- Tranplate Harness
- Class XT 60LB Wing or REC XT / EXP 45LB Wing
- XT or XT Lite Dive Rite Backplate
- 1.5 inch crotch strap with quick release
If you have any questions about any Dive Rite Products please let us know. We are happy to help get you all setup.
Part# 10003740
Built for your grandest adventures, literally, the Transporter Waterproof Duffel was developed to offer a remarkable IPX7 rating with an easy-to-operate zip closure, offering unmatched protection access to your expedition gear. From multiday whitewater trips to the toughest overland excursions, the 40L is perfect for keeping a sleeping bag, tent and other everday items perfectly dry and secure no matter what conditions are thrown your way. It's rare for dry bags like this to get an IPX rating, but we've put ours to the test, demonstrating fully-submersible waterpoofing up to one meter of water for 30 minutes. Padded shoulder straps, reinforced grab handles and ample lash points make it easy to tote, strap and secure this duffel through hell or high water. It's not just ultra-tough, it's sustainable too. Constructed from 100% recycled and bluesign® approved 630D ripstop high tenacity nylon, we've double-coated the fabric with durable TPU for extreme abrasion resistance. Go ahead, huck these bags from raft to shore, truck to rock or anywhere else for that matter. They're built to last.
KEY ATTRIBUTES
TRAVEL-READY
Multiple lash points make it easy to attach bag on a vehicle, raft, pack animal, etc.
CARRY OPTIONS
Fully removable backpack straps/carry handles with durable non-corroding aluminum hardware.
WATERPROOF RATING
IPX 7 rating - Waterproof Submersible(Can be submersed in one meter of water for 30 minutes)
FEATURES
- Waterproof IPX 7 rating, fully submersible
- Durable YKK AquaSeal zipper provides quick, wide access to load and is completely waterproof when fully zipped
- Grab loops at each end of zipper path provide leverage for smooth opening and closing
- Fully removable backpack straps/carry handles with durable non-corroding aluminum hardware
- Wide grab loops on ends and sides make for easy handling
- Multiple lash points make it easy to secure the duffel to vehicles, rafts, pack animals etc.
- Internal compression straps help secure the contents and take pressure off the zipper to ease operation
- Removable internal mesh pocket