Products

Shop

Show :

121-140 of over 683 results

MORE CHOICES AVAILABLE

BC/DRYSUIT QUICK DISCONNECT LOW PRESSURE HOSES

XS Scuba

$31.00

Part# LP06QD

6" L.P. QD Hose

ADD TO CART
(0)

MORE CHOICES AVAILABLE

BCD Pro-kit LED

AKONA

$202.00

Part# PROKIT-2

Outfit your BCD with all the necessities and accessories you need on a BCD. The PROKIT2 is the Full Scale Upgrade.

DETAILS

420 Lumen LED Flashlight with ergonomic grip. Rated to 330 feet.
AKONA Stainless Steel BCD short blade knife.
Heavy Duty Gauge/Computer Console Retractor with lock line feature and using Spectra Nylon line.
Light Weight Flashlight Retractor with Spectra Nylon line.

ADD TO CART
(0)

MORE CHOICES AVAILABLE

BELLOWS HORIZONTAL ZIP POCKET

Dive Rite

$60.00

Part# AC3204

With two compartments and a lanyard for securing your valuable accessory items, the Horizontal Zip Pocket carries everything you need on a dive.

Most dives require the ability to carry some type of accessory, such as a slate, safety reel, or cutting device. These accessories must be easily accessible and properly stowed when not in use. Adding the Bellows Horizontal Zip Pocket (AC 3204) to your diving rig allows you to bring everything you need on a dive and remove the stress of losing your valuable gear.

Designed with a traditional horizontal style and two heavy-duty zippers on the long edge of the pocket, the Bellows Horizontal Zip Pocket requires a little more space on a waist strap yet offers additional storage room with the secondary zip pocket, allowing you to carry everything you need on a dive. With two separate compartments, organizing your diving accessories couldn’t be easier.

Need room for securing line markers, a safety reel, dive tables, extra clips, Jon lines, cookies, a spare mouthpiece, or a backup light? The bellows pocket comes with a 36-inch (92 cm) looped lanyard attached to the inside of the pocket for attaching any piece of gear you need. No more fumbling for the right tools; just pull out the lanyard, unclip the tool you need, and stuff the lanyard and gear back inside the pocket.

The bellows pocket has a large opening for easy access even when diving with gloves. Constructed from 1000-denier ballistic nylon with a Superfabric front that is tear and abrasion resistant and with two heavy-duty zipper closures, your gear stays secure in the pocket even when squeezing through a tight restriction or exploring deep inside a wreck. A heavy duty mesh panel allows for quick draining.

It easily attaches to a backplate or harness system using two 2-inch nylon webbing loops sewn to the back of the pocket. Just slip the loops over a standard 2-inch webbing waist strap and secure the pocket in place.

The Bellows Horizontal Zip Pocket also features two 1-inch stainless D-rings for using the pocket as a bum pouch while sidemounting. A single clip mounting option is also possible using a double bolt snap.

Material: 1000-denier ballistic nylon with a Superfabric front is tear and abrasion resistant
Pocket Orientation: Horizontal style (opens on the long edge)
Storage compartments: 2
Closes via a heavy duty zipper
Lanyard: Internal 36 in long (92 cm), adjustable lanyard to securely attach tools
Attachment Options:
- Two 2 in (50 mm) nylon webbing loops on the back of the pocket slide over a standard 2 in webbing strap
- Two 1 in (25 mm) stainless D-rings used in conjunction with double bolt snaps (see here) to clip the pocket off as a bum pouch while sidemounting
- Single clip mounting using a double bolt snap

Drainage: Heavy duty mesh panel
Internal Depth: Expands from 0.5 in to 1.5 in (1.3 cm to 3.8 cm) to accommodate slates, maps, dive tables, spare masks, reels, Jon lines, and lights
Size: 6 in x 8 in x 1.5 in (15.2 cm x 25.4 cm x 3.8 cm)
Weight: 4.4 oz (125 g)

ADD TO CART
(0)

MORE CHOICES AVAILABLE

BELLOWS VERTICAL ZIP POCKET

Dive Rite

$55.00

Part# AC3203

With lots of space and a lanyard for securing your valuable accessory items, the Vertical Zip Pocket carries everything you need on a dive.

Most dives require the ability to carry some type of accessory, such as a slate, safety reel, or cutting device. These accessories must be easily accessible and properly stowed when not in use. Adding the Bellows Vertical Zip Pocket (AC 3203) to your diving rig allows you to bring everything you need on a dive and remove the stress of losing your valuable gear.

Designed in a vertical fashion with a heavy-duty zipper on the short edge of the pocket, the Bellows Vertical Zip Pocket requires less space on a waist strap yet still allows you to carry everything you need on a dive.

Need room for securing line markers, a safety reel, dive tables, extra clips, Jon lines, cookies, a spare mouthpiece, or a backup light? The bellows pocket comes with a 24-inch (61 cm) looped lanyard attached to the inside of the pocket for attaching any piece of gear you need. No more fumbling for the right tools; just pull out the lanyard, unclip the tool you need, and stuff the lanyard and gear back inside the pocket.

The bellows pocket has a large opening for easy access even when diving with gloves. Made with 1000-denier ballistic nylon and a Superfabric front that is tear and abrasion resistant and with a heavy-duty zipper closure, your gear stays secure in the pocket even when squeezing through a tight restriction or exploring deep inside a wreck.

Material: 1000-denier ballistic nylon with a Superfabric front is tear and abrasion resistant
Pocket Orientation: Vertical style (opens on the short edge)
Storage Compartments: 1
Closes via a heavy duty zipper
Lanyard: Internal 24 in long (61 cm), adjustable lanyard to securely attach tools
Attachment: Two 2 in (50 mm) nylon webbing loops on the back of the pocket slide over a standard 2 in webbing strap
Drainage: Nickel-plated brass grommets on the bottom of the pocket resist rust and corrosion
Internal Depth: Expands from 0.5 in to 2.5 in (1.3 cm to 6.35 cm) to accommodate slates, maps, dive tables, spare masks, reels, Jon lines, and lights
Size: 10 in x 6 in x 2.5 in (25.4 cm x 15.2 cm x 6.4 cm)
Weight: 3.8 oz (108 g)

ADD TO CART
(0)

MORE CHOICES AVAILABLE

Bikini Sports Bra Hybrid

Spacefish Army

$59.00

Part# SFA003BT-XS

Spacefish Army PRODUCT DESCRIPTION

Our Army of Adventurers do it all and they need a bra that is ready to switch between running errands, hopping in the water, hitting the gym, and relaxing at home. That's why we've created this crossover Convertible Bikini / Sports Bra for whatever life throws at you! Let our colorful Mermaid Print remind you throughout the day that Life's a Beach!

Made from the highest quality Recycled Polyester Materials on the market, our Bikini features a flattering V-neck cut and a sturdy 1.5" elastic bottom band that gives you the coverage and support you need for your work outs and swimming without compromising aesthetics.

The inside is fully lined to provide an extra layer of modesty if you decide to go without the removable padding.

Our straps are completely adjustable and convertible without the hassle of metal or plastic closures that are prone to breakage. Rearrange the straps to cross in the front, the back, on the side, or tie around your neck for a variety of different looks.

Removable Pads with substantial full inside lining
Adjustable Straps without any metal or plastic
Straps can create 5 different looks
Durable Reinforced Overlock and Coverstitch
Four-way stretch material for maximum comfort
Smooth and comfortable microfiber yarn

ADD TO CART
(0)

MORE CHOICES AVAILABLE

BlackTip Tech

Dive Xtras

$2099.00

Part# DX-004-11000

With a fully trimmed out scooter body, the BlackTip Tech is ready for anything! Tackle any technical dive with ease, thanks to our longer, more balanced scooter design.

Balanced tube length
Neutral & trim
Uses 2x 9Ah or 12Ah DCB batteries

Included Items:

Tail
Battery Tube
Saltwater Weight Plate
Strap & Carry Handle Kit
Nose Cone
Tow Cord w/ Bolt Snap

ADD TO CART
(0)

MORE CHOICES AVAILABLE

BlackTip Travel

Dive Xtras

$1899.00

Part# DX-004-10000

Weighing in at just 24lbs, the BlackTip Travel combines the best of Dive Xtras' powerful scooter performance with a travel-friendly design!

Our most compact scooter design
Lightweight design (24 lbs)
Uses 2x 5Ah, 6Ah, 9Ah, or 12Ah DCB batteries

Included Items:

Tail
Battery Tube
Strap Kit
Nose Cone
Tow Cord w/ Bolt Snap

ADD TO CART
(0)

MORE CHOICES AVAILABLE

BLADEFIN

Atomic

$179.95

Part# 05-0255-1P

The Atomic Blade Fin combines 2-Fame Designs on One-Fin to Maximize Kicking Power in the Water. Atomic has achieved this with POWER-LOOP MONOCOQUE STRUCTURAL ENGINEERING MONOCOQUE and POWER RAILS . Power-Loop Monocoque, is an Engineering-Term meaning Single Shell." This design structure is Heavily Utilized in the design of an Aircraft Fuselage or Indy Race Car, for example. Power-Loop Monocoque is a Construction Technique that Utilizes the External Skin to Support Some-or-Most of the Load-Area of the Fin while Power is applied through the Frame Rails (Power Rails) into the water.

POWER-LOOP MONOCOQUE FOOT POCKET POWER PLATE The Power-Loop Monocoque Structure is Located Over-the-Top of the Foot-Pocket and connected to the Fin via a Frame Rail (or Backbone/Bulkhead), Backbone Frame Structure Inside-the-Power Rails. In turn, this structure is connected to the sole plate (Power Plate), giving the diver a Very-Solid-Feeling of the Fin being Bolted" to the Foot as Power is Smoothly-Transferred to the water without Twisting. POWER RAIL The Frame Rail Structure-on-Each-Side of the Fin is designed to Mimic a Bulkhead, Backbone or Spine. VERTICAL STABILIZERS Oversized Vertical Stabilizers at the Tips keep the Fin Tracking Straight Up-and-Down. THE FOUR C'S OF ATOMIC THRUSTER FIN POWER: CAPTURE CONTAIN CHANNEL CONTROL Thruster Fins Capture Water and Contain the Flow without Spilling it Over-the-Edges while Channeling the Flow of Water Down-the-Blade and Off-the-Vertical Stabilizer Edge Tips, and Controlling the Power with Atomics' two Frame Structures (Monocoque and Frame Rail) to Fully Optimize the Paddle Fin Design.

Wow! Is what you will say once you have tried these Fins, but that's not all! The Atomic Aquatics Non-Vented Blade Fins have a NEW BUCKLE STYLING All new Buckle Style with Wicked" design and Cleaner Styling. Fin is equipped with EZ-LOK Squeeze-Style" Quick-Release Buckles which Snap-On-and-Off with Ease, yet Will-Not Disengage- Accidentally. The Rubber Fin Straps are equipped with a Large Pull-Tab for Easy Donning and Doffing. Fins are available in Multiple Colors and Sizes and are covered by a 12 month limited warranty.

This product can only be shipped to U.S. addresses.

Warranty Information

This product has a limited warranty of 12 months.

http://www.atomicaquatics.com/

714-375-1433

Atomic Blade Fins Features

Atomic Aquatics Blade Fins:
Blade Fins: Designed to Deliver
Power & Thrust Only Paddle Fin Design Can Provide Divers
Cruise-Thru-the-Water
Unique Structural Engineering:
Combines Power-Loop Monocoque& Frame Rail Designs
Maximize Kicking Power
Vertical Stabilizers On-Fin-Tips: Keeps Fin Tracking Straight Up and Down w/Every Kick
Wicked Fin and Buckle Styling:
Distinctive Look
Perfectly Complements Atomic VENOM Mask and SV Series Snorkel
See SKU's: ATMMVN, ATMMVF, ATMMVNARC, ATMSSV1, ATMSCSV1, ATMSSV2
Four C's: Capture - Contain - Channel Control:
Capture Water & Contain Flow w/o Spilling Over Edges
Channeling Flow of Water Down Blade & Off Vertical Stabilizer Edge Tips
Controlling Power w/2-Frame Structures (Monocoque and Frame Rail)
Fully Optimize Paddle Fin Design & Kicking Effort
2-Structural Frame Designs:
Used in Aircraft & Indy Race Cars
Atomic Blade Fins Engineered for Power & Thrust
Power-Loop Monocoque Structure:
Engineering Term Monocoque
Means Single-Shell
Utilizing External Skin to Support Load Area
Power is Applied Thru-Fame Rails
Foot Pocket Power Plate:
Power-Loop Monocoque Structure Connected to Sole Plate (Power Plate)
Gives Divers Solid Feeling
Like Fin is Bolted to Foot
Power Rail:
Frame Rail Design
Each Side of Fin Mimics a Backbone or Spine
Connects to Monocoque
Vertical Stabilizers:
Oversized Stabilizers at Fin Tips
Keeps Fin Tracking Straight Up and Down
EZ-LOK Buckle System:
Easily Snap Buckle On and Off
Be Confident, Won't Release Accidentally
Buckles Rotate 180°
Straps Adjust w/Simple Pull
Rubber Fin Straps Equipped w/Large Pull Tab
Easy Donning and Doffing
Non-Vented Blade Fins
Available in Multiple Colors and Sizes

ADD TO CART
(0)

MORE CHOICES AVAILABLE

Bonaire Live Boat AOW Reef Dive

Signature Scuba

$95.00

Part# Bonaire Live Boat AOW Reef Dive

****** NOTE If this shows special order, then it is sold out!!!!!*****

Bonaire Live Boat AOW Reef Dive

We have an opportunity to dive an untouched reef in Bonaire. This will be on a boat that the rebreather divers are taking, but there will be some extra spots for recreational divers. This is limited to advanced divers as it will be a live boat.

ADD TO CART
(0)

MORE CHOICES AVAILABLE

BOOKSCREW 12MM

OMS

$8.00

Part# OM20313

Forged out of stainless steal primarily used to connect a metal backplate to a multitude of our items such as an IQ backpack, all of our BC wings, our back pads, and Single Tank Adapters(STA) and more . Book Screws can also be used to mount inflation systems to the back plate. They fit a standard 3/8 hole on back plates. They are sold in singles and come in 3 sizes.

The 10mm is generally for a single grommet attached to the back plate. Example would be attaching a back pad to the back plate. The 16mm is generally for attaching two grommet items and the back plate. Example would be attaching a soft STA, wing, and the back plate. The 20mm is generally for attaching three grommet items and the back plate. Example would be attaching a soft STA, wing, IQ pack and the back plate

ADD TO CART
(0)

MORE CHOICES AVAILABLE

BOOKSCREW 22MM

OMS

$8.00

Part# OM20315

ADD TO CART
(0)

MORE CHOICES AVAILABLE

BottomDrop Weight Pockets pair

XS Scuba

$117.00

Part# HL208

Full size weight pocket to add lead weights to a diving harness

Load weights from the top zipper

Uses the single-pull Catch n’ Release™ dump mechanism

Attaches to 2 in (50 mm) webbing

Each pocket holds up to 15 lbs (7 kg) of lead weights

Sold as a pair

ADD TO CART
(0)

MORE CHOICES AVAILABLE

BVI Mesh Backpack

Stahlsac

$55.95

Part# 888921BLU

BVI Mesh Backpack

ADD TO CART
(0)

MORE CHOICES AVAILABLE

CAI SEMI-DRY SNORKEL

Sherwood

$46.00

Part# SN054BS

The Cai Semi-Dry Snorkel utilizes a newly created shield which acts like a force field against waves, wind, and splashing from entering the snorkel tube.

The streamlined base provides a reservoir of space for air to flow freely from the tube to the mouthpiece without restriction. The oversize purge valve allows easy clearing of the snorkel.

The 100% liquid silicone mouthpiece and flex tube ensure comfort in every situation.

The Cai also comes with a new Quick-Disconnect Snorkel Keeper to eliminate the effort of connecting to your mask for each dive.

FEATURES

Now comes standard with the Sherwood EZ Bite Mouthpiece
Semi Dry/Splash Guard Top
Large bore tube for large volumes of air
Deep base receptacle captures water without impacting breathing experience

ADD TO CART
(0)

MORE CHOICES AVAILABLE

CAM STRAP ROLLER

Dive Rite

$42.00

Part# BC2035

Dive Rite cam straps are available in several options. Whatever your application is, we have a cam strap that will work. All cam straps are sold individually, and all are made in the USA.

The stainless steel cam strap with roller buckle (BC 2035) uses a 2-inch wide nylon webbing with marine grade stainless steel buckle. 36-inch (91.4 cm) webbing length is suitable for cylinders from 6.9-inches (17.5 cm) to 8-inches (20.3 cm) in diameter, which includes them most popular sizes of cylinders. Nylon rollers on the cam strap protect the cylinder from being scratched by the buckle, while a rubber non-slip pad prevents the cylinder from shifting once the cam buckle has been secured. Excess webbing is secured using hook-and-loop, which will also prevent the buckle from accidentally coming open. This cam strap comes standard on all Transpac XT, VoyagerPac, and TravelPac systems.

The low-profile, 1.5-inch cam strap (BC 2036-1.5) is a popular option for rigging sidemount or stage bottles. Using a low-profile marine grade stainless steel roller cam buckle, the 1.5-inch wide strap is 36-inches (91.4 cm) long and is user adjustable to fit cylinders from 5-inches (12.7 cm) in diameter up to 8-inches (20.3 cm) in diameter. Rubber non-slip pad prevents the cylinder from shifting once the cam strap is secured. Excess webbing is secures using hook-and-loop, which will also prevent the buckle from accidentally coming open.

The 2-inch cam strap is also available with a plastic buckle (BC 2032). The plastic buckle is a popular option for applications where trimming every ounce possible from gear is necessary. The plastic buckle cam strap includes a rubber non-slip pad to prevent the cylinder from shifting once the cam strap has been secured. Excess webbing is secured using hook-and-loop, which will also prevent the buckle from accidentally coming open.

2-inch stainless steel buckle cam straps are also available in a double-long version, with a 52-inch (132 cm) length (BC 2035-DOUBLE). Note: Double length cam strap will include 2 rubber non-slip pads.

BC 2035