- Made in USA
- Outer Bag Material: SuperFabric brand technology for maximum durability against the harshest elements
- Diver’s Side Panel Material: 1680 ballistic nylon
- Inner Bladder Material: Heavy-duty 210 denier nylon laminated to withstand and resist pinches and punctures
- Lift: 40 lbs (18.1 kg). Optional back-up bladder available
- Gusset Control System: Stretch cord that can be used to further streamline the wing if desired without restricting airflow
- Urethane flanges are welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools
- 16 in elbow inflator and a 22 in LP inflation hose come standard with other hose lengths available upon request
- Two sets of marine-grade 316 stainless steel grommet mounting holes are used to attach the wing to a harness and set diver’s trim
- Compatibility: Designed for use with the TransPac, TransPlate, or metal backplates
- Approximate dimensions not inflated: 22 in tall x 21 in wide (55.8 cm x 53.3 cm)
- Weight: 3 lbs (1.4 kg)
MORE CHOICES AVAILABLE
Part# BC5500-E-16
The BC 5500 CCR XT adjustable lift wing is designed for the O2ptima eCCR or any rebreather diver looking for maximum durability, versatile options, and the ability to streamline their hoses and wing for in-water efficiency.
Using a SuperFabric® brand technology XT material to create an armor-clad outer shell that is impervious to damaging pinches and cuts, a 1680 ballistic nylon diver’s side panel, and a heavy-duty, 210 denier nylon laminated inner bladder, the BC 5500 CCR XT will hold up under all the rigors of diving.
Offering 40 pounds (18.1 kg) of lift with a dual bladder option (BC 5500-DUAL), the BC 5500 CCR XT is versatile enough for any rebreather diving configuration and is designed for use with our TransPac, TransPlate, or metal backplates.
With an offset inflator hose, lying just to the outside of the chest-mounted counterlungs, and an open midsection, hose positioning couldn’t be more streamlined. The open midsection allows rebreather hoses to pass through the middle of the wing, freeing up space behind the diver’s head and keeping airflow from being compressed at the top of the wing. No longer will hoses press down on the wing and restrict airflow.
A 16-inch elbow inflator hose and a 22-inch low-pressure inflation hose come standard but if needed, other hose lengths are available upon request.
To allow a diver to set their trim more effectively, the BC 5500 CCR XT has two sets of marine-grade 316 stainless steel grommet mounting holes, which are used to attach the wing to a harness in two different positions. So, no matter what harness system or what rebreather is used, the wing can be positioned to maximize the diver’s trim in the water.
A Gusset Control System (GCS) cord is also provided (optional for use) that can be used to further streamline the wing such as when carrying small bailout bottles. The GCS is not like a bungee wing because it does not restrict airflow; instead the GCS promotes added streamlining and buoyancy control, yet allows the wing to inflate to its full capacity.
The BC 5500 CCR XT is backed by our Worry-Free Lifetime Guarantee and is made exclusively in the USA.
MORE CHOICES AVAILABLE
Part# M-212QB-FB
The M-212 Ceos is a low-profile low volume two window mask that features the newly developed and revolutionary Freedom Technology delivering superior fit, comfort and performance. The Ceos is one of the first next generation TUSA masks offering this innovative new technology combined with superior design, build quality, materials and frame construction.
Part# AKB140
LIGHT ROLLER BAG
ONLY WEIGHS 8 POUNDS! The Chelan is lightweight yet durable. Making it easier for you to pack more gear and still meet airline weight restrictions.This extremely lightweight roller bag still packs all the durability but with a much lighter profile. This bag is great for any type of travel.
DETAILS
•Exterior pocket with locking D-ring
•Durable smooth-rolling wheels
•Heavy-Duty YKK zippers
•Volume: 149 Liters
•Exterior Dimensions: 31" X 21" X 14"
•Weight: 8 Lbs.
•Limited Two Year Warranty
Part# AKB607
AKONA's Regulator Bags are fully padded to protect your valuables. The Classic Regulator Bag comes with a padded console sleeve and fits in the Chelan Roller.
DETAILS
•Fully padded
•Heavy-duty YKK#5 zipper
•Interior Velcro straps
•Padded console sleeve<
•Exterior Dimensions: 12" X 12" X 3"
•Limited Two Year Warranty
MORE CHOICES AVAILABLE
Part# BC2030-E-16-BLACK
The OG doubles wing.
The Dive Rite Classic Wing has stood the test of time as the first aircell designed specifically for use with large double cylinders. With 55 pounds of lift, the Classic Wing was designed to carry double steel 104s with multiple stage bottles and other accessories. Using a horseshoe design, divers can target lift where it’s needed to balance out their rig and stay in trim.
Compared to the original “Doubles Wing” released in 1985, today’s Classic version has an enhanced construction using a premium 1000 denier ballistic nylon outerbag and a heavy duty 210 nylon laminated inner bladder. The solid center panel features two sets of 316 stainless steel grommets for mounting so a diver can tweak the wing position to adjust trim. A piece of 2-inch nylon webbing runs down the center of the Classic wing to reinforce the grommets. The Classic wing is available in all black, black with red trim, and black with blue trim.
The top outlet is centered so it’s nestled between the cylinders under the isolation valve and clear of hose routing. The wing comes standard with a 16-inch corrugated hose (12-inch available by request) with elbow attachment, a robust power inflator, and a 22-inch low pressure inflator hose. The pull dump over pressure valve is in the traditional lower left corner of the wing. Welded urethane bladder flanges allow easy, tool free removal and replacement of corrugated hoses and over pressurization valves. Appealing to a minimalist diving philosophy, the Classic wing is free of any bungee, tabs, or excess clutter.
Like all of Dive Rite’s aircells since 1985, the Classic wing is proudly designed and produced in the USA.
- Made in USA
- Lift: 55 lbs (25 kg)
- Outerbag Material: 1000 Denier Ballistic Nylon
- Colors: All Black, Black with Red trim, and Black with Blue trim
- Inner Bladder Material: 210 Denier Laminated Nylon
- 16 or 12 in elbow
- 22 in LP inflator hose
- Mounting: Two sets of marine-grade 316 stainless steel grommet holes reinforced by 2 in nylon webbing
- Welded urethane bladder flanges
- Weight: 2.2 lbs (1 kg)
MORE CHOICES AVAILABLE
Part# BC5400-E-12
The Classic XT Wing (model BC 5400) is the workhorse of our series of wings. With a history dating back to our early days, the Classic Wing has been dived and proven many times over, leading the way for divers to penetrate deep into caves, explore shipwrecks, or cruise comfortably deep on an ocean ledge.
Designed solely for double tanks and with the option of a single or dual bladder, the Classic XT provides 60 pounds (27.2 kg) of lift, which can accommodate two 104 cubic foot (17 L) backmounted cylinders and two 80 cubic foot (11 L) stage bottles.
Supporting heavy doubles and stage bottles is one thing, but being able to properly balance and stabilize that amount of heavy gear for proper trim while swimming is where the Classic XT really shines. The donut-shape design provides excellent stability and control while diving by keeping a volume of inflation on the top, sides, and bottom. This, along with an optional integrated Gusset Control System (GCS) that reduces “taco” effect, promotes effective streamlining and puts buoyancy where it is most needed (throughout the torso supporting the weight of the tanks) for superior horizontal trim. The GCS is not like a bungee wing because it does not restrict airflow; instead, the GCS promotes added streamlining and buoyancy control, yet allows the wing to inflate to its’ full capacity.
Designed to handle the extremes, the Classic XT is built using our rugged SuperFabric® brand technology XT material that creates an armor-clad outer shell that is impervious to damaging pinches and cuts, along with a 1680 ballistic nylon diver’s side panel. Inside the SuperFabric® outer shell, a heavy-duty, 210 denier nylon laminated bladder enhances the ruggedness and superior performance of the Classic XT.
The Classic XT comes equipped with a choice of a 12- or 16-inch elbow or a 16-inch rapid exhaust (pull dump) along with an appropriate low-pressure inflation hose. It also has two sets of marine-grade 316 stainless steel grommet mounting holes for attaching the wing to a harness and set of tanks.
As a part of our modular BCD system, the Classic XT can be matched with either a TransPac® XT, Transplate, or any metal back plate and webbing harness.
The Classic XT is backed by our Worry-Free Lifetime Guarantee and are made exclusively in the USA.
- Made in USA
- Outer Bag: SuperFabric® brand technology outer shell and 1680 ballistic nylon diver’s side panel (extremely resistant to pinches and punctures)
- Inner Bladder: 210-denier nylon laminated (highly resistant to pinches and punctures)
- Wing Gusset Control system for streamlining
- Lift: 60 lbs (27.2 kg)
- Cylinder Accommodation: Two 104 cubic foot (17 L) backmounted cylinders and two 80 cubic foot (11 L) stage bottles
- 15, 22, or 27 in (38, 55.8, or 68.5 cm) LP inflator hose
- 16 in rapid exhaust (pull-dump) or 12 or 16 in elbow
- Mounting: Two sets of marine-grade 316 stainless steel grommet holes are used to attach wing to harness and set diver trim
- Urethane Flanges: Welded in place, which make it easy to switch out corrugated hoses and over pressurization valves without tools
- Weight: 3 lbs (1.36 kg)
- Size: 24 in tall x 26 in wide (60.9 cm x 66 cm)
Part# CP-450NT-II-1300N-EZCR
The AL1300NP offers great features including the four-level push-button on/off switch, and rechargeable 18650 lithium-ion battery. This is the perfect light for general purpose diving.
- AL1300NP
- 1300 Lumens at 6500K color temperature
- A narrow 10° beam angle with a soft edge
- Four power settings with a color-coded battery indicator
- AL450N Tail
- 450 Lumens at 6500K color temperature
- A narrow 8° beam angle with a soft edge
- Tail button switch with battery indicator
- United States customer service from our office in Clearwater, FL
Part# CP-450WT-1300N-EZCR
The AL1300NP offers great features including the four-level push-button on/off switch, battery-level indicator, and rechargeable 18650 lithium-ion battery. With its narrow 10° beam angle this is the perfect light for general purpose diving.
- AL1300NP
- 1300 Lumens at 6500K color temperature
- Rechargeable lithium-ion 18650 battery
- Four power settings with a color-coded battery indicator
- AL450W Tail
- 450 Lumens at 6500K color temperature
- A wide 85° beam angle with a soft edge
- United States customer service from our office in Clearwater, FL
Part# RG2740-NH
The Compact SPG is a great alternative for divers that want a lightweight SPG for traveling, sidemount bottles, or stage bottles.
A polycarbonate face and a nickel plated brass body reduce the weight of the Compact SPG by 43% compared to our Mini Tech SPG. A clean, black and white face means the Compact SPG is easy to read. This naked gauge has a 1.75-inch (44.5 mm) diameter with a 1.5-inch (38 mm) face (RG 2740-NH).
A Bourdon tube gauge, the Compact SPG is calibrated to 5000 PSI in 100 PSI increments (360 Bar in 10 Bar increments) for the highest level of accuracy. A luminescent dial makes it easier to read in low light situations.
Comes standard as a naked SPG with a spool to attach a hose swivel to the gauge. A boot is available as a separate option, if desired. The Compact SPG is suitable for oxygen service and is CE approved.
- Gauge Diameter: 1.75 in (44.5 mm)
- Face Diameter: 1.5 in face (38 mm)
- Weight: 4 oz (113 grams)
- Polycarbonate face
- Nickel-plated brass body
Part# OM20904
This OMS Rubber Corrugated Hose can get you out of a bind when you really need it. It replaces the corrugated inflator hose on OMS, Hollis and many compatible BCDs and Wings.
Having the right spares on-hand when out diving can make or break a dive. Don't let a malfunctioning BCD Corrugated Hose ruin a day of diving, always carry a spare. Don't forget to have a few spare cable ties for proper installment on-hand. Makes a great Save-a-Dive Kit item.
FEATURES:
- Designed for OMS BCD Power Inflators and compatible with other manufacturers
- Don't Let a Malfunctioning BCD Corrugated Hose Ruin a Day-of-Diving
- High Quality Rubber Corrugated Hose
- Available in 3-Lengths: 13" (33 cm) / 16" (40.6 cm) / 19" (48.2 cm)
- Great Save-a-Dive Kit item
Part# MLP11-Black
Lightweight and flexible low pressure hoses
- Multi-layer construction
- Excellent resistance to abrasion
- Kink-resistant design
- Approved for use for use with up to 40% oxygen
- Individually tested at the factory
- EN250 approved
- Individually marked with the Miflex logo and date code
- Manufactured in Italy
- Inner liner is made from polyether-based polyurethane, not PVC, as found in lesser-priced imitators
Part# MLP11-Blue
Lightweight and flexible low pressure hoses
- Multi-layer construction
- Excellent resistance to abrasion
- Kink-resistant design
- Approved for use for use with up to 40% oxygen
- Individually tested at the factory
- EN250 approved
- Individually marked with the Miflex logo and date code
- Manufactured in Italy
- Inner liner is made from polyether-based polyurethane, not PVC, as found in lesser-priced imitators
Part# MLP11-Green
Lightweight and flexible low pressure hoses
- Multi-layer construction
- Excellent resistance to abrasion
- Kink-resistant design
- Approved for use for use with up to 40% oxygen
- Individually tested at the factory
- EN250 approved
- Individually marked with the Miflex logo and date code
- Manufactured in Italy
- Inner liner is made from polyether-based polyurethane, not PVC, as found in lesser-priced imitators
Part# MQD12-Black
Miflex 12" QD Hose - Black
Part# MQD9-Black
Miflex 12" QD Hose - Black
Part# MQD8-Yellow
Miflex 12" QD Hose - Black
Part# Custom Miflex 9" HP Hose Black
Miflex 12" QD Hose - Black
Part# HP6.875-Black
Miflex 12" QD Hose - Black
Part# MQD8-Green
Miflex 12" QD Hose - Black
