Part# 6233.06

A full featured and durable waterproof housing for Olympus Tough TG-5 and TG-6 cameras. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.

Construction

Our specially formulated ABS-PC blend housing is highly durable yet lightweight for travel. The light color keeps your camera cooler when shooting in warm, sunny environments.

Lens Support

Dome Port for Olympus FCON-T02 Kit with Fisheye Lens for Olympus TG-6 # 64362 The Olympus Tough TG-series cameras already shoot out of this world super macro, but haven't really been ideal for ultra wide angle in the past. This special dome port is designed for use with the Olympus Tough TG-6 with the special Olympus FCON-T02 Fisheye Converter Lens and CLA-T01 Adapter attached.

The DC1 6" Dome Port # 6401 offers the best of everything: wide angle, macro, and over-under all on one dive. This special dome port replaces the housing's standard port and provides sharp 25mm wide angle, full zoom through and macro capabilities, and is perfect for split shots (half-in, half-out of the water).

The WD-3 Wide Angle Dome # 6430.3 attaches to the front of the standard port and provides mid-range angle of view with no vignetting (dark shadows in the corners of the image).

The W-30 Wide Angle Lens # 6430, INON UWL-H100, and other 67mm threaded wide angle lenses, provide a wider maximum angle of view. Because these are separated from the camera's lens by glass, air, and water, some vignetting and edge distortion will be present. These effects can be reduced or eliminated by using a smaller aperture, zooming in slightly, and/or cropping in post-production.

External macro lenses with 67mm threads from INON, Epoque, and other manufacturers, can be attached directly to the front of the housing's port.

Flash Options

Due to the position of the camera's flash in relation to its lens, the built-in flash is not suitable to illuminate photos under water. For the best color and clarity, we recommend adding a filter, strobe, or constant-on light. The built-in flash may be used to trigger external strobes via fiber optic sync cord. Two ports are provided for the connection of up to two fiber optic cords.

Any current model Ikelite DS strobe can be triggered fiber optically with true automatic Olympus TTL exposure using the RC1 TTL Receiver # 4412 and Fiber Optic Cord # 4501.

Wi-Fi Transfer

Use the camera's built-in Wi-Fi feature to download photos to another device without removing the camera from the housing. The Wi-Fi feature is only usable above water within close proximity to the connected device.

Part# 6116.18

A full featured and durable underwater housing for Sony Cyber-shot DSC-RX100 VI and DSC-RX100 VII digital cameras. Perfect for scuba, snorkel, surf, pool, and any application in or around the water.

Construction

Our specially formulated ABS-PC blend housing is highly durable yet lightweight for travel. The light color keeps your camera cooler when shooting in warm, sunny environments.

Lens Support

Add the press-fit Macro Adapter # 9306.82 with any 67mm threaded macro wet lens for incredibly super macro photography. Compatible wet lenses include but are not limited to the INON UCL-165, Subsee Magnifier, Saga close up lenses, Nauticam CMC-1, and others.

The optional WD-4 Wide Angle Dome # 6430.4 provides a wider angle of view underwater without the edge distortion, vignetting, or weight typically associated with an external wide angle wet lens. The WD-4 is a 0.75x magnification factor and simply slides on and off of the housing's lens port.

Optional 6" dry dome
The DC3 6" Dome Port # 6403 offers the best of everything: wide angle, macro, and over-under all on one dive. This special dome port replaces the housing's standard port and provides sharp 24mm wide angle and is perfect for split shots (half-in, half-out of the water). Approximately 3/4 of the camera's zoom range is usable behind the dome and macro images can be captured with the dome installed.

Optional wide angle port
The optional Wide Angle Port M67 for Sony RX100 VI # 9306.02 can be used in place of the housing's standard port for use of 67mm threaded external wide angle wet lenses. This port has been optimized to provide the best combination of wide angle and macro photography. The shorter port length accommodates an effective zoom range of 24-70mm.

This port is optimized for use with wide angle wet lenses designed for the 28mm equivalent focal length, including the INON UWL-H100, Nauticam WWL-1, and others. Some vignetting (dark shadows around the edges of the image will be present at wider focal lengths. We recommend zooming to eliminate vignetting or cropping your images in post-production.

The front of the port also accepts 67mm threaded macro wet lenses by INON, Subsee, Saga, Nauticam, and others.

The standard lens port is removed and the Wide Angle Port M67 simply threads into the front of the housing for quick and easy installation. The camera cannot be zoomed past 70mm with this port attached. The camera will shut down if zoomed past this point.

Wi-Fi Transfer

Use the camera's built-in Wi-Fi feature to download photos to another device without removing the camera from the housing. The Wi-Fi feature is only usable above water within close proximity to the connected device.

Compatibility

Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.

Differences in lens and control placement prevent other camera models from being used in or adapted to this housing. We are not aware of any other models which may be used in or adapted to this housing.

Part# 47012

Vacuum valve fitting for any housing with a spare 1/2" accessory port. Additionally, it can be installed in place of the 1/4-20 top mount featured on all DSLR housings produced since 2009.

The valve's low profile avoids interference with control operation. The included waterproof plug is secured to the fitting to prevent accidental loss. Includes vacuum pump with gauge.

This valve is installed quickly and easily by securing one nut on the inside of the housing. The housing does not need to be returned to the factory for installation.

Compatibility

Most newer housings with an opaque white front feature a spare 1/2-20 threaded accessory port. The plug of this spare port may be replaced with this vacuum valve.

Additionally, it can be installed in place of the 1/4-20 top mount featured on all DSLR housings produced since 2009.

Part# 47011

A vacuum leak detection system allows you to check for leaks after assembling your housing and prior to entering the water. This can make the difference between a successful dive and a stressful situation.

Our new pump is designed to be more compact, ergonomic, durable, and faster to get to the recommend pressure of 10 mmHg.

Our 200DL and 50DL housings ship with a compatible vacuum valve pre-installed. Optional vacuum valve and pump kits are available for most housings that do not come with a valve.

Part# 6430.4

The WD-4 Wide Angle Conversion Dome provides all of the benefits of a dome port underwater without the limitations.

The WD-4 simply slides onto the standard port of the Ikelite housing— no modification to or replacement of the housing's original port is necessary. The WD-4 can be removed and replaced underwater so there is no limit to the camera's zoom or macro capabilities. Approximately 3/4 of the camera's zoom range can be used with the dome in place.

The conversion dome corrects for the refractive magnification of the flat port underwater to restore the camera's original angle of coverage. For example, the WD-4 and Canon PowerShot G16 combination provides 28mm angle of coverage with incredibly crisp corners.

The WD-4 Wide Angle Dome is compatible with any Ikelite housing featuring a 3.9-inch diameter lens port. To check compatibility with Ikelite housings, please refer to the housing instruction manual or webpage.

The WD-4 Dome is only effective underwater. It requires water between the back of the WD-4 and the front of the housing's lens port to affect the angle of coverage. Like any wide angle wet lens, it may be used for split shots (half-in, half-out of the water), but there will be two water lines: one in front of the dome and one behind.

The WD-4 Wide Angle Dome is not compatible with external color filters.

Part# 9306.02

The optional Wide Angle Port M67 for Sony RX100 VI and RX100 VII # 9306.02 can be used in place of the housing's standard port for use of 67mm threaded external wide angle wet lenses. This port has been optimized to provide the best combination of wide angle and macro photography. The shorter port length accommodates an effective zoom range of 24-70mm.

This port is optimized for use with wide angle wet lenses designed for the 28mm equivalent focal length, including the INON UWL-H100, Ikelite W-30, Nauticam WWL-1, and others.  Some vignetting (dark shadows around the edges of the image will be present at wider focal lengths. We recommend zooming to eliminate vignetting or cropping your images in post-production.

The front of the port also accepts 67mm threaded macro wet lenses. Compatible wet lenses include but are not limited to the INON UCL-165, Subsee Magnifier, Saga close up lenses, Nauticam CMC-1, and others.

The standard lens port is removed and the Wide Angle Port M67 simply threads into the front of the housing for quick and easy installation. The camera cannot be zoomed past 70mm with this port attached. The camera will shut down if zoomed past this point.

Compatibility

Ikelite Housing # 6116.18

Part# CINSBAHJ

Insta360 X5 Dive Case

• Completely invisible when shooting 360° video.
• Seamless underwater stitching.
• Waterproof down to 60m (197ft).
• Capture crystal-clear 360° video with zero distortion.
• Use with the Invisible Selfie Stick for epic third-person views.
• The new quick-dry Storage Bag is usable both on land and underwater, protects your Dive Case from bumps and scratches and can be attached to a Buoyancy Control Device (BCD).

Part# CINSAAHA

Insta 360 X5 Standard Bundle

Part# aoi-21700-pkg

21700 At-A-Glance

• 15A High Performance
• Built-in pressure relief valve
• Microporous barrier for heat dissipation
• Built-in PTC for surge protection
• Nickel-plated stainless steel cathode and anode
• Abrasion-resistant coating
• Compatible with lights such as MW-4000 which requires two high output 21700.

15A High Discharge 5000mAh Battery

The next generation 21700 rechargeable battery, the 21700 has an amazing 5000mAh capacity. This powerful battery has improved performance, and superior energy density compared to the previous 18650 batteries. An extra 21700 is a great backup battery to have on hand, as more electronic products and flashlights will utilize this battery. The 21700 is a high-performance battery capable of >15A discharge for high lumen lights and headlamps.

 

Premium Quality Battery

The 21700 comes with all of the safety features, quality engineering, and more that have made Xtar a trusted brand for rechargeable Li-ion batteries. Your expensive electronics are safely paired with a 21700 that features a built-in pressure relief valve, a high-temperature resistant design, and built-in safeguards to prevent surges. This protects you from overcharging, over-discharging, as well as short-circuits. The 21700 is built with premium materials, such as nickel-plated stainless steel connectors for impact resistance, good conductivity, and resistance against oxidation. Safe and reliable, the 21700 is globally insured and has multiple certifications for electronic use.

 

SPECIFICATIONS

• Capacity: 5000mAh
• Voltage: 3.6V
• Output: 15A
• Weight: 2.57oz (73g)
• Length: 2.96in (75.2mm)
• Diameter: 0.85in (21.6mm)

Part# SL98104